Skip to content

OCR GCSE Design and Technology grade calculator

Type a mark from a mock or a past paper to see the grade it would have got on OCR's own grade boundaries, for the newest series and every year before it. It runs in this browser, so nothing you type is sent to us.

Type a mark to see the grade it would have got on OCR GCSE Design and Technology's past boundaries.

How the boundaries have moved

A grade 7 needed 64% of the marks in June 2019 and 66.5% in June 2026.

Design and Technology
20%50%80%201920222023202420252026June 2019: grade 7 needed 128 out of 200 (64%)June 2022: grade 7 needed 122 out of 200 (61%)June 2023: grade 7 needed 132 out of 200 (66%)June 2024: grade 7 needed 122 out of 200 (61%)June 2025: grade 7 needed 128 out of 200 (64%)June 2026: grade 7 needed 133 out of 200 (66.5%)7June 2019: grade 4 needed 83 out of 200 (41.5%)June 2022: grade 4 needed 68 out of 200 (34%)June 2023: grade 4 needed 82 out of 200 (41%)June 2024: grade 4 needed 75 out of 200 (37.5%)June 2025: grade 4 needed 77 out of 200 (38.5%)June 2026: grade 4 needed 83 out of 200 (41.5%)4

Each point is the lowest mark for that grade in the June series, as a percentage of the total. A solid line is the higher grade and a dashed line the lower one.

Show as a table
Design and Technology
SeriesGrade 7Grade 4
June 2026133/200 (66.5%)83/200 (41.5%)
June 2025128/200 (64%)77/200 (38.5%)
June 2024122/200 (61%)75/200 (37.5%)
June 2023132/200 (66%)82/200 (41%)
June 2022122/200 (61%)68/200 (34%)
June 2019128/200 (64%)83/200 (41.5%)

More for Design and Technology

Common questions

What mark do you need for each grade in GCSE Design and Technology?

In June 2026, a grade 7 needed 133 out of 200 and a grade 4 needed 83. Boundaries are set again for every series, so these are last time's marks rather than the next exam's.

Is a mock exam grade the same as the real grade?

Not always. Schools often mark mocks against an older year's boundaries, sometimes more strictly to leave room to improve, and the real exam's boundaries are set only after it has been marked. A grade from a mock is a useful guide to where things stand, not a prediction of the result.

Can I work out a grade from one paper?

As a rough guide, yes: OCR publishes a boundary for each paper, which it calls notional, and the calculator uses those. The real grade comes from the marks for all the papers added together, so one strong or weak paper can be balanced by the others.

Why does the same mark get a different grade in different years?

Boundaries are set after each exam is marked, so that a grade means the same standard even when one year's paper is harder than another's. A harder paper usually has lower boundaries, so the same mark can be worth a higher grade.

cookie is independent and is not affiliated with or endorsed by any exam board. Every paper here is a link to the board's own copy on its own website, and the papers belong to the boards that set them. If a link has stopped working, the board's own past paper page is linked on each course. The grade boundaries are copied from the boards’ own published documents, each linked under its table.