Chuyển đến nội dung

Cambridge O Level Physics

O-Level · Cambridge International (CAIE)Physics34 ghi chú trong 7 thư mục, 151 KB

34 ghi chú ôn tập cho Cambridge International (CAIE) O-Level Physics, do cookie tạo, gồm 7 phần theo các chủ đề của khóa học.

Notes for Cambridge O Level Physics (5054), for the 2026 to 2028 syllabus, in folders for the seven topic areas in the syllabus order, with units and practical skills last. Each note gives the ideas, the equations with their units, and a worked example. Delete any folder your course leaves out once the notes are yours.

Có gì bên trong

Ghi chú đầu tiên

Motion, forces and energy / Measurement, motion and graphs

Measuring lengths and times

Lengths are measured with a rule or tape for anything over a few millimetres. For smaller lengths, such as the diameter of a wire, use a micrometer. Its main scale and thimble scale are read together: the main scale gives the whole millimetres and half millimetres, and the thimble scale, which has 50 divisions and moves 0.5 mm in one turn, gives the hundredths. A reading of 2.5 mm on the main scale with 27 divisions showing on the thimble is 2.5+0.27=2.772.5 + 0.27 = 2.77 mm.

Time intervals come from a clock or digital timer. Timers are reliable to a fraction of a second, but human reaction time adds an error of roughly a fifth of a second when a person starts and stops a stopwatch. For a short interval, or for the period of a pendulum, the error is reduced by timing many oscillations and dividing. If 20 swings of a pendulum take 32.0 s, one swing takes 32.0/20=1.632.0 / 20 = 1.6 s, and the uncertainty in that single period is far smaller than the uncertainty in one timing of a single swing.

Volumes of liquids are read from a measuring cylinder by reading the bottom of the meniscus at eye level. The volume of an irregular solid is found by displacement: the solid is lowered into a liquid and the rise in the liquid level is its volume.

Scalars and vectors

A scalar quantity has a size, or magnitude, and nothing else. Distance, speed, time, mass, energy and temperature are scalars. A vector quantity has a magnitude and a direction. Displacement and velocity are vectors, and so are force, weight and momentum. Acceleration, and the electric and gravitational field strengths, have a direction too.

Two vectors at right angles combine by Pythagoras' theorem. A force of 3 N to the east and a force of 4 N to the north give a resultant of 32+42=5\sqrt{3^2 + 4^2} = 5 N. Two vectors in the same line add or subtract along that line, and the direction of the result follows whichever is larger.

Speed, velocity and distance

Speed is the distance travelled per unit time:

v=st v = \frac{s}{t}

where ss is the distance in metres and tt is the time in seconds, so speed is in m s−1\mathrm{m\,s^{-1}}. Velocity is the change in displacement per unit time, so velocity has a direction as well as a size. Two cars can have the same speed and opposite velocities.

Average speed is the total distance divided by the total time, not the average of the speeds used along the trip. A cyclist rides 300 m at 5 m/s and then 200 m at 4 m/s. The times are 60 s and 50 s, so the total distance is 500 m and the total time is 110 s, giving an average speed of 500/110=4.5500 / 110 = 4.5 m/s. The simple average of 5 and 4 would give 4.5 by coincidence here, but it is not the general rule, and a different pair of speeds would give a different answer.

Acceleration

Acceleration is the change in velocity per unit time:

a=ΔvΔt a = \frac{\Delta v}{\Delta t}

with aa in m s−2\mathrm{m\,s^{-2}}. When the velocity is changing by the same amount in each second, the acceleration is uniform. When it changes by different amounts in different seconds, the acceleration is non-uniform. A negative acceleration is a deceleration, so a car slowing from 20 m/s to 5 m/s in 5 s has a=(5−20)/5=−3a = (5 - 20) / 5 = -3 m/s2^2, which is a deceleration of 3 m/s2^2.

A ball dropped from rest near the Earth's surface falls with an acceleration of about 9.8 m s−29.8\,\mathrm{m\,s^{-2}}, which is the acceleration of free fall gg. If air resistance is ignored, its speed after 3.0 s is v=gt=9.8×3.0=29.4v = gt = 9.8 \times 3.0 = 29.4 m/s.

Distance-time graphs

On a distance-time graph, distance is on the vertical axis and time on the horizontal axis. The gradient at any point is the speed at that moment.

  • A horizontal line means the object is at rest.
  • A straight line with a constant gradient means constant speed.
  • A curve that steepens means the object is accelerating.
  • A curve that flattens means the object is decelerating.

A car that travels 60 m in the first 5 s, is stationary for 3 s, and then covers 90 m in the next 6 s has a gradient of 60/5=1260 / 5 = 12 m/s in the first part, zero in the middle and 90/6=1590 / 6 = 15 m/s at the end.

Speed-time graphs

On a speed-time graph, speed is on the vertical axis. Two things can be read from it.

  • The gradient is the acceleration. A horizontal line is constant speed, a sloping line is constant acceleration, and a curve has an acceleration that changes.
  • The area under the graph is the distance travelled.

For constant acceleration, the distance is the area of the trapezium under the line. An object speeds up uniformly from 4 m/s to 16 m/s over 6 s. The acceleration is (16−4)/6=2.0(16 - 4) / 6 = 2.0 m/s2^2, and the distance is the area of the trapezium: 12(4+16)×6=60\frac{1}{2}(4 + 16) \times 6 = 60 m.

When an object moves at constant speed, the area is a rectangle, so the distance is speed multiplied by time. A slope that has a steeper gradient later on means the acceleration is larger at that time.

Worked example

A train starts from rest and accelerates uniformly for 20 s to a speed of 15 m/s, then travels at that speed for 60 s, then brakes uniformly to rest in 10 s.

The first stage has acceleration a=15/20=0.75a = 15 / 20 = 0.75 m/s2^2 and distance 12×15×20=150\frac{1}{2} \times 15 \times 20 = 150 m. The second stage has distance 15×60=90015 \times 60 = 900 m. The braking stage has deceleration 15/10=1.515 / 10 = 1.5 m/s2^2 and distance 12×15×10=75\frac{1}{2} \times 15 \times 10 = 75 m. The total distance is 150+900+75=1125150 + 900 + 75 = 1125 m, and the total time is 90 s, so the average speed is 1125/90=12.51125 / 90 = 12.5 m/s.

The average speed is lower than the cruising speed because the train spent time at speeds below 15 m/s while it was speeding up and slowing down.

Và còn 33 mục nữa: mở bất kỳ mục nào trong danh sách ở trên.

Đánh giá

Chưa có nhận xét nào. Thêm những ghi chú này vào ghi chú của bạn để trở thành người đầu tiên viết nhận xét.