Passer au contenu

Edexcel International A level Physics

International A Level · EdexcelPhysics39 notes dans 6 dossiers, 173 KB

39 notes de révisions pour Edexcel International A Level Physics, créée par cookie, répartie en 6 sections qui suivent les thèmes du cours.

Notes for Edexcel International A level Physics (YPH11, Issue 3), in folders for the six units in the specification's order, with the two practical skills units in their own folders. Delete any folder your course leaves out once the notes are yours.

Contenu

La première note

Mechanics and materials / Motion in a straight line

Displacement, velocity and acceleration

Displacement is how far an object is from its starting point, measured in a stated direction. Velocity is the rate of change of displacement, and acceleration is the rate of change of velocity. Both velocity and acceleration are vectors, so a negative value means the quantity points the opposite way to the positive direction you chose. A ball thrown straight up has a positive upward velocity on the way up and a negative one on the way down, but its acceleration stays at −9.81 m s−2-9.81\,\mathrm{m\,s^{-2}} (taking up as positive) the whole time, because gravity does not change direction.

Speed and distance are the scalar versions of velocity and displacement. They carry no direction, so a trip that goes out and comes back has a displacement of zero but a distance greater than zero.

Uniformly accelerated motion

When acceleration is constant, five quantities are linked by four equations. The quantities are displacement ss, initial velocity uu, final velocity vv, acceleration aa and time tt. The equations are

v=u+at v = u + at
s=(u+v)t2 s = \frac{(u + v)t}{2}
s=ut+12at2 s = ut + \tfrac{1}{2}at^2
v2=u2+2as v^2 = u^2 + 2as

Each equation leaves out one quantity. The first leaves out ss, the second leaves out aa, the third leaves out vv and the fourth leaves out tt. Choose the one that does not contain the quantity you do not know.

A worked example: a car speeds up from 4.0 m s−14.0\,\mathrm{m\,s^{-1}} to 16.0 m s−116.0\,\mathrm{m\,s^{-1}} in 6.0 s6.0\,\mathrm{s}. The acceleration comes from the first equation,

a=v−ut=16.0−4.06.0=2.0 m s−2 a = \frac{v - u}{t} = \frac{16.0 - 4.0}{6.0} = 2.0\,\mathrm{m\,s^{-2}}

and the distance covered from the second,

s=(4.0+16.0)×6.02=60 m s = \frac{(4.0 + 16.0) \times 6.0}{2} = 60\,\mathrm{m}

The third equation gives the same answer as a check: s=4.0×6.0+12×2.0×6.02=24+36=60 ms = 4.0 \times 6.0 + \tfrac{1}{2} \times 2.0 \times 6.0^2 = 24 + 36 = 60\,\mathrm{m}.

These equations only apply when acceleration is constant. If the acceleration changes, use graphs or calculus-free methods such as the area under a graph, described below.

Displacement-time graphs

On a displacement-time graph the gradient is the velocity. A straight line means constant velocity. A curve means the velocity is changing: a steeper curve at a point means a larger velocity there. A horizontal line means the object is at rest. The gradient at any point is the slope of the tangent drawn to the curve at that point, which is the instantaneous velocity. The gradient between two points is the average velocity over that interval.

Velocity-time graphs

On a velocity-time graph the gradient is the acceleration and the area between the line and the time axis is the displacement. Area below the axis counts as negative, because it represents motion in the negative direction. A straight line with a constant slope means constant acceleration. A curved graph needs a tangent to find the acceleration at one instant, and the area under a curve can be estimated by counting squares or by splitting the area into trapeziums.

For a car that accelerates uniformly from rest and then brakes to rest, the total displacement is the area of the triangle or trapezium under the graph. The average velocity over the whole trip is that displacement divided by the total time.

Acceleration-time graphs

On an acceleration-time graph the area between the line and the time axis is the change in velocity. A line above the axis gives a rise in velocity and a line below the axis gives a fall. Because velocity is the integral of acceleration, a graph of constant acceleration gives a rectangle or a triangle whose area is easy to find.

Free fall

An object falling near the Earth's surface, with air resistance negligible, has an acceleration of g=9.81 m s−2g = 9.81\,\mathrm{m\,s^{-2}} downwards. Its velocity increases by about 9.8 m s−19.8\,\mathrm{m\,s^{-1}} every second. A practical test of this is to time a steel ball falling a measured height. From s=ut+12at2s = ut + \tfrac{1}{2}at^2 with u=0u = 0, the acceleration is a=2s/t2a = 2s/t^2. Repeat the timing for several heights and plot ss against t2t^2: a straight line through the origin with gradient 12g\tfrac{1}{2}g confirms the result and gives a value for gg.

Checking the answer

Before accepting a result, check its sign and size. A stopping car should have a negative acceleration when the forward direction is positive. A falling object reaches a few tens of metres per second after a couple of seconds, not a few thousand. If a calculated displacement is larger than the total distance covered, the sign or the method is wrong.

Et 38 autres : ouvre-les depuis la liste ci-dessus.

Avis

Aucun avis écrit pour le moment. Ajoute ces notes aux tiennes et tu pourras être le premier à en laisser un.