Passer au contenu

AQA A-Level Design and Technology: Product Design

A-Level · AQADesign and Technology1 354 cartes

1 354 flashcards pour AQA A-Level Design and Technology, créée par cookie, dans 57 sous-paquets qui suivent les sujets du programme.

Réviser ces cartes

Sélectionné pour le même cours parmi les ressources les plus utilisées. Tout est consultable sans compte.

Tout pour Design and Technology

Tu cherches de l’aide en Design and Technology ?

Cookie Tutoring, notre service de cours particuliers, propose peut-être des professeurs pour Design and Technology. Les cours ont lieu en direct et en tête-à-tête. Les 15 premières minutes avec chaque professeur sont gratuites.

Trouver un tuteur

Flashcards for AQA A-level Design and Technology: Product Design (7552), split into Technical principles and Designing and making principles, then by the specification's numbered sections, with materials, processes, industrial practice, designers, standards and the maths skills. Delete or suspend any subdeck your course leaves out once the deck is yours.

En l’ajoutant, tu en obtiens ta propre copie, avec tous ses sous-paquets. Chaque carte revient juste avant que tu ne l’oublies, et chaque réponse juste ou fausse contribue à ta maîtrise de son sujet. Une fois le paquet ajouté, tu peux supprimer ou suspendre les parties que tu n’étudies pas.

Contenu (57 sous-paquets)

  • Designing and making principles398 cartes
    • 3.2.1 Design methods and processes27 cartes
    • 3.2.2 Design theory51 cartes
    • 3.2.3 How technology and cultural changes impact on designers33 cartes
    • 3.2.4 Design processes31 cartes
    • 3.2.5 Critical analysis and evaluation27 cartes
    • 3.2.6 Selecting appropriate tools, equipment and processes24 cartes
    • 3.2.7 Accuracy in design and manufacture26 cartes
    • 3.2.8 Responsible design23 cartes
    • 3.2.9 Design for manufacture and project management28 cartes
    • 3.2.10 National and international standards in product design26 cartes
    • Maths skills80 cartes
      • Areas, volumes and density14 cartes
      • Graphs, charts and statistics13 cartes
      • Machining and manufacturing calculations10 cartes
      • Number and percentages16 cartes
      • Ratios and scale10 cartes
      • Trigonometry and geometry17 cartes
    • Science knowledge22 cartes
  • Technical principles956 cartes
    • 3.1.1 Materials and their applications95 cartes
      • Classification of materials41 cartes
      • Material properties39 cartes
      • Testing materials15 cartes
    • 3.1.2 Performance characteristics of materials294 cartes
      • Composites, smart and modern materials51 cartes
      • Elastomers and biodegradable polymers27 cartes
      • Metals64 cartes
      • Papers and boards29 cartes
      • Polymer based sheet and film18 cartes
      • Polymers42 cartes
      • Woods63 cartes
    • 3.1.3 Enhancement of materials36 cartes
    • 3.1.4 Forming, redistribution and addition processes167 cartes
      • Adhesives and fixings12 cartes
      • Jigs and fixtures10 cartes
      • Metal forming27 cartes
      • Metal joining29 cartes
      • Metal wasting15 cartes
      • Paper and board forming11 cartes
      • Polymer forming36 cartes
      • Wood joining and forming27 cartes
    • 3.1.5 The use of finishes69 cartes
      • Metal finishes21 cartes
      • Paper and board finishes14 cartes
      • Polymer finishes7 cartes
      • Printing processes13 cartes
      • Wood finishes14 cartes
    • 3.1.6 Modern industrial and commercial practice44 cartes
    • 3.1.7 Digital design and manufacture44 cartes
    • 3.1.8 The requirements for product design and development24 cartes
    • 3.1.9 Health and safety32 cartes
    • 3.1.10 Protecting designs and intellectual property29 cartes
    • 3.1.11 Design for manufacturing, maintenance, repair and disposal42 cartes
    • 3.1.12 Feasibility studies20 cartes
    • 3.1.13 Enterprise and marketing in the development of products29 cartes
    • 3.1.14 Design communication31 cartes

Quelques-unes de ses cartes

  • What is user centred design?
    An approach that puts the needs, wants and abilities of the people who will use the product at the centre of every decision
  • What is a ferrous metal?
    A metal that contains iron
  • What is the difference between a need and a want in design?
    A need is essential for the user, and a want is a desire that is not essential
  • What is a non-ferrous metal?
    A metal that contains no iron
  • What is a value in design?
    A belief such as fairness or sustainability that a user wants a product to respect
  • Why are most ferrous metals magnetic and prone to rusting, while non-ferrous metals are not?
    Iron is magnetic and reacts with oxygen and water to form rust, and non-ferrous metals contain none
  • Information gathered first-hand by the designer, such as from a survey or interview
    Primary data
  • A mixture of a metal with one or more other elements, made to improve its properties
    Alloy
  • Information already collected by someone else, such as books, websites and reports
    Secondary data
  • Why is a metal alloyed with another element?
    To improve properties such as strength, hardness or corrosion resistance

Et 1344 de plus une fois le paquet ajouté.