跳转到内容

OCR A level Geology

A-Level · OCRGeology20 篇笔记 个文件夹,90 KB

cookie 制作的 OCR A-Level Geology 复习笔记,共 20 篇,分为 7 个章节,按照课程主题编排。

Revision notes for OCR A level Geology (H414), following the specification for exams from 2027. Seven folders follow the course's modules, from practical skills and foundations through tectonics, petrology and economic geology, geohazards and basin analysis.

内容

第一篇笔记

Practical skills in geology / Practical skills and fieldwork

Geology is an observational science. Rocks and fossils are read through their properties, and the field is where most of those properties are first seen. Planning an investigation, recording what you see, measuring it accurately and judging how far the results can be trusted are the skills behind that reading.

Planning an investigation

A sound practical starts from a question that can be answered by measurement. Decide which variable you will change (the independent variable), which you will measure (the dependent variable), and which you will hold constant (the control variables). If a control is not held constant, a change in the result cannot be attributed to the variable you changed.

Choose apparatus that is suitable for the scale and precision the question needs. A hand lens is the right tool for grain size in a hand sample. A balance is needed for mass, and a measuring cylinder or displacement method for volume.

Implementing an investigation

Carrying out the work safely and correctly is part of the skill. Use each piece of apparatus as it is designed to be used, record observations as they are made rather than afterwards, and keep the raw records separate from any processed values. A record kept this way can be checked later by someone else.

Recording observations in the field

Field observation starts with location. Find your position using a map, a compass and features you can identify on the ground, without relying on a GPS device. Record where you are on the map, and sketch the outcrop before you describe it.

A field sketch is a labelled drawing that shows the relationships between units: their boundaries, their thickness, folds and faults. Add a scale, either a bar scale or a fiducial scale, which is an object of known size placed in the picture. Without a scale, a sketch can show shape but not size.

A graphic log is a vertical record of a sequence drawn to scale. Each bed is drawn with a standard symbol for its lithology, and the sedimentary structures and fossils are added beside the bed. Bed thicknesses should be measured, not estimated by eye.

Structural data are recorded with a compass clinometer. Strike is the compass bearing of a horizontal line on a plane, and dip is the angle of the plane below the horizontal, measured at right angles to strike. For a fold limb, you may only be able to measure an apparent dip, which is the dip seen in one direction on a section. Record the dip direction as well as the angle, so that the true orientation can be worked out later.

Describing a rock

A full description has two halves. The macro description covers what is visible in a hand sample or outcrop: colour, grain size, grain shape, sorting, cement, fossil content and any structures. The micro description, made from a thin section under a light microscope, covers mineral identity, texture, crystal shape, porosity and the arrangement of grains.

Describe the features in a fixed order, so that two observers would produce comparable records. Use the standard grain size divisions when you name a rock. For igneous rocks, coarse crystals are over 5 mm across, medium crystals lie between 1 and 5 mm, and fine crystals are under 1 mm.

Measurement and accuracy

Every measurement has a unit, and every result has a number of significant figures that matches the precision of the data. A result calculated from numbers given to two significant figures should not be stated to six.

Precision is how closely repeated readings agree. Accuracy is how close a reading is to the true value. A set of readings can be precise and still inaccurate if the instrument has a zero error. Systematic errors shift every reading in one direction, and random errors vary unpredictably between readings. Repeating a measurement and averaging reduces random error, but it does nothing for systematic error.

Percentage error is the absolute error divided by the accepted value, multiplied by 100. If a measured mass of 9.6 g is compared with an accepted value of 10.0 g, the absolute error is 0.4 g and the percentage error is 0.410.0×100=4%\frac{0.4}{10.0} \times 100 = 4\%.

Mineral tests

Three simple tests separate most rock-forming minerals. The Mohs hardness test ranks a mineral against a scale of reference materials from 1 (talc) to 10 (diamond). A mineral that scratches glass is harder than about 5.5. The density test divides mass by volume. A mineral of mass 45.0 g and volume 15.0 cm3^3 has a density of 45.015.0=3.0\frac{45.0}{15.0} = 3.0 g cm−3^{-3}. The streak test rubs a mineral across unglazed porcelain and records the colour of the powder, which can differ from the colour of the crystal.

Evaluation of results

A result is judged against the question it was meant to answer. Look for anomalies, which do not fit the pattern of the other readings, and decide whether they reflect an error or a real feature. Identify the limitations of the method, and suggest changes to the procedure or the apparatus that would reduce the uncertainty.

Working from a map

A geological map shows the distribution of rock units at the surface. Cross-sections drawn from the map show the same units at depth, using the structures that the map implies. To construct a section, draw a line across the map, project the boundaries onto it, and join them using the dips and the known thicknesses of the beds. A section that cannot be drawn consistently with the map is evidence of a mistake in the interpretation.

Geographic information systems hold geological data in layers that can be combined and analysed. They are used to build risk maps, to plan drilling and to communicate results to people who are not geologists.

Review

Planning fixes the question and the controls. Fieldwork records what is there, with its orientation and its scale. Description puts the observations into a standard form. Measurement and error analysis show how far the results can be trusted. Each of these steps is checked against the others, and a result that disagrees with the rest is reason to look again.

还有 19 个:可从上方列表中打开任意一个。

评论

还没有文字评价。把这些笔记添加到你自己的笔记中,就可以成为第一个评价的人。