コンテンツへ移動

AQA A level Design and Technology: Product Designの成績計算ツール

模擬試験または過去問の得点を入力すると、最新年度とそれ以前の各年度について、AQA公式の成績境界に照らした場合の成績がわかります。この計算はこのブラウザー内で行われるため、入力内容が私たちに送信されることはありません。

得点を入力すると、AQA A level Design and Technology: Product Designの過去の成績境界に当てはめた場合のグレードがわかります。

成績境界の推移

A A needed 70.3% of the marks in June 2019 and 73% in June 2026.

Design and Technology: Product Design
10%45%80%201920222023202420252026June 2019:グレードAに必要な点数は281/400(70.3%)ですJune 2022:グレードAに必要な点数は258/400(64.5%)ですJune 2023:グレードAに必要な点数は277/400(69.3%)ですJune 2024:グレードAに必要な点数は287/400(71.8%)ですJune 2025:グレードAに必要な点数は291/400(72.8%)ですJune 2026:グレードAに必要な点数は292/400(73%)ですAJune 2019:グレードEに必要な点数は123/400(30.8%)ですJune 2022:グレードEに必要な点数は92/400(23%)ですJune 2023:グレードEに必要な点数は110/400(27.5%)ですJune 2024:グレードEに必要な点数は122/400(30.5%)ですJune 2025:グレードEに必要な点数は127/400(31.8%)ですJune 2026:グレードEに必要な点数は133/400(33.3%)ですE

各点は、Juneの試験回でそのグレードを取るために必要だった最低点を、合計点に対する割合で示しています。11月の再受験など、ほかの試験回は、年ごとに同じ条件で比較できるよう除外しています。実線は高い方のグレード、破線は低い方のグレードです。

表で表示
Design and Technology: Product Design
試験回グレードAグレードE
June 2026292/400 (73%)133/400 (33.3%)
June 2025291/400 (72.8%)127/400 (31.8%)
June 2024287/400 (71.8%)122/400 (30.5%)
June 2023277/400 (69.3%)110/400 (27.5%)
June 2022258/400 (64.5%)92/400 (23%)
June 2019281/400 (70.3%)123/400 (30.8%)

Design and Technology: Product Designの関連情報

よくある質問

What mark do you need for each grade in A level Design and Technology: Product Design?

In June 2026, an A needed 292 out of 400 and an E needed 133. Boundaries are set again for every series, so these are last time's marks rather than the next exam's.

Is a mock exam grade the same as the real grade?

Not always. Schools often mark mocks against an older year's boundaries, sometimes more strictly to leave room to improve, and the real exam's boundaries are set only after it has been marked. A grade from a mock is a useful guide to where things stand, not a prediction of the result.

Can I work out a grade from one paper?

As a rough guide, yes: AQA publishes a boundary for each paper, which it calls notional, and the calculator uses those. The real grade comes from the marks for all the papers added together, so one strong or weak paper can be balanced by the others.

Why does the same mark get a different grade in different years?

Boundaries are set after each exam is marked, so that a grade means the same standard even when one year's paper is harder than another's. A harder paper usually has lower boundaries, so the same mark can be worth a higher grade.

cookieは独立したサービスであり、いずれの試験実施団体とも提携しておらず、推奨も受けていません。ここにある各問題用紙は、試験実施団体のウェブサイトにある公式コピーへのリンクです。問題用紙の所有権は、作成した試験実施団体にあります。リンクが機能しなくなった場合は、各コースに試験実施団体の過去問ページへのリンクがあります。 成績境界は、試験実施団体が公開した資料から転記しており、各表の下に資料へのリンクがあります。