WJEC A level Physics
WJEC A-Level Physicsの試験勉強用ノート20件。cookieが作成。コースのトピックに沿った5個のセクションに分かれています。
Notes for WJEC GCE AS and A level Physics (2420 and 1420), in folders for each unit in the specification's order. The four A2 options (A to D) each have their own folder, so delete any you do not take.
内容
最初のノート
Motion, energy and matter / Vectors, moments and kinematics
Base units and checking equations
Every physical quantity can be written in terms of six base SI units: the kilogram (kg), metre (m), second (s), ampere (A), mole (mol) and kelvin (K). A derived unit is built from these, so a speed is in ms−1 and a force is in kgms−2, which is the newton. Prefixes such as kilo, milli and micro scale the base units by powers of ten.
Units give a quick check on an equation. Each term in an equation must have the same units as every other term, and the two sides must match. If an equation for distance gives ms−1 on one side, it is wrong, whatever the numbers in it.
Scalars and vectors
A scalar has magnitude only: mass, time, temperature, speed, density and pressure are scalars. A vector has magnitude and direction: displacement, velocity, acceleration and force are vectors. Speed is the magnitude of velocity, which is why speed is a scalar and velocity is not.
Two vectors that act along the same line add directly. Two perpendicular vectors combine with Pythagoras' theorem for the magnitude and a trigonometric ratio for the direction. A vector can be resolved into two perpendicular components, each found by multiplying the vector by the cosine or sine of its angle to that axis. A force F at angle θ to the horizontal has a horizontal component Fcosθ and a vertical component Fsinθ.
A worked example: a 3 N force and a 4 N force at right angles to each other combine to a resultant of 32+42=5 N. Its direction is tan−1(4/3)≈53∘ from the 3 N force.
Density
Density is mass per unit volume, so ρ=m/V. A block of volume 200cm3 is 2.0×10−4m3. If its density is 2700kgm−3, its mass is 2700×2.0×10−4=0.54 kg.
Moments and equilibrium
The turning effect of a force about a point is its moment, which is the force multiplied by the perpendicular distance from the point to the line of action of the force. A spanner 0.40 m long, pushed at right angles with a force of 50 N, applies a moment of 0.40×50=20Nm.
The principle of moments says that when a body is in equilibrium, the sum of the clockwise moments about any point equals the sum of the anticlockwise moments. Equilibrium also needs the resultant force to be zero. The centre of gravity of a uniform cylinder, sphere or cuboid lies at its geometric centre. A body is stable when a line drawn down from its centre of gravity falls inside its base.
Displacement, velocity and acceleration
Displacement is the change in position, and velocity is the rate of change of displacement. Acceleration is the rate of change of velocity. The gradient of a displacement-time graph gives velocity, and the gradient of a velocity-time graph gives acceleration. The area under a velocity-time graph gives displacement. For non-uniform acceleration, the gradient at a point gives the instantaneous value.
For motion in a straight line with constant acceleration, four equations link the variables, where u is the initial velocity, v the final velocity, a the acceleration, s the displacement and t the time:
A worked example: a car travelling at 12ms−1 brakes at 3ms−2. It stops after t=12/3=4 s, having travelled s=u2/(2a)=144/6=24 m.
Falling bodies and projectiles
Without air resistance, a falling body has a constant downward acceleration g near the Earth's surface. With air resistance, drag rises with speed until it balances the weight, and the body then falls at a constant terminal velocity.
Horizontal and vertical motion are independent. A body launched horizontally with a velocity of 20ms−1 from a height of 45 m takes t=2h/g=90/9.8≈3.0 s to land, and it travels 20×3.0≈61 m horizontally in that time. The path is a parabola when air resistance is ignored, because the horizontal velocity stays constant while the vertical velocity increases uniformly.
Measuring g
In a freefall experiment, a body falls through a known distance and the time is recorded, so that g is found from s=21gt2. The sources of error are timing the start and end of the fall and the effect of air resistance, which is reduced by using a dense, compact object.
さらに19件あります。上のリストから開けます。
レビュー
文章でのレビューはまだありません。このノートを自分のノートに追加して、最初のレビューを投稿できます。