OCR A level Biology B (Advancing Biology)
21 notatek do nauki dla OCR A-Level Biology B (Advancing Biology), utworzonych przez cookie, w 5 sekcjach zgodnych z tematami kursu.
Notes for OCR A Level Biology B (Advancing Biology), H422, for exams from 2027, in folders for the five modules of the specification in its order, with one note for each group of related topics. The practical skills the course uses are in their own folder. Delete any folder your course leaves out.
Co zawiera
Pierwsza notatka
Practical skills / Planning, uncertainty and evaluation
Planning an investigation
A good plan starts with a question that can be answered by measuring one thing while the others are held constant. The independent variable is the one the investigator changes on purpose, and the dependent variable is the one measured in response. Every other factor that could affect the result is a control variable and must be kept the same, or its effect will be mixed up with the effect being tested.
Choosing the apparatus is part of the plan. The range of values used for the independent variable should be wide enough to show a pattern, and the number of values should be large enough to see whether the pattern is a line, a curve or something more complicated. A control, set up identically except for the independent variable, shows what happens without the treatment. Repeats at each value make it possible to find a mean and to judge how much the results vary.
Recording and presenting data
Every measurement needs a unit. A table should have a heading for each column that gives the quantity and its unit in brackets, such as "Time (s)", so that the numbers can be read without the text. Values should be recorded to the same number of decimal places as the instrument allows.
A graph has the independent variable on the horizontal axis and the dependent variable on the vertical axis. Each axis is labelled with the quantity and unit and given a scale that spreads the points over at least half of the grid. The gradient of a line of best fit is found from two points on the line that are far apart, using the formula change in y divided by change in x. The intercept is the value of y where the line crosses the axis.
Uncertainty
Every measuring instrument has an uncertainty. For an analogue scale, a common convention is to take the uncertainty of a single reading as half of the smallest division. A reading of a measuring cylinder with divisions of 1 cm3 therefore has an uncertainty of 0.5 cm3. A digital reading is taken as uncertain by its last digit.
The percentage uncertainty of a measurement is the uncertainty divided by the measured value, multiplied by 100. For example, a length of 5.0 cm with an uncertainty of 0.1 cm has a percentage uncertainty of
When several quantities are combined in a calculation, their percentage uncertainties are added, so a result that depends on two measurements is less precise than either measurement on its own.
Precision and accuracy
Precision describes how close repeated readings are to one another. Accuracy describes how close a reading is to the true value. Repeated readings with a small spread are precise, but if they all lie away from the true value they are not accurate. Taking the mean of repeated readings reduces the effect of random error, which varies from one reading to the next. It does not reduce systematic error, which pushes every reading the same way, such as a zero that is not set correctly on a balance.
Anomalous results
An anomalous result does not fit the pattern of the others. It may be due to a mistake in measurement, an unnoticed change in conditions or a real but unusual event. The first step is to look for a cause. Only when a cause can be found, or when the value is clearly an outlier, should it be left out of the mean. Excluding a value without a reason makes the results look more consistent than they are.
Evaluating an investigation
A conclusion has to be supported by the data and must answer the original question. An evaluation should name the limits of the method: factors that were not controlled, the range of values that was tested, and any assumptions made. Improvements are useful when they target a specific weakness, such as a wider range of temperatures, more repeats at the extremes, or a more precise instrument for the measurement with the largest percentage uncertainty.
Apparatus and techniques
Some techniques recur across the course. A serial dilution makes a range of concentrations by diluting each solution by the same factor from the one before. A graticule is a scale inside the microscope eyepiece, and it must be calibrated against a stage micrometer before it can measure anything, because its divisions have no fixed length. A colorimeter measures how much light a coloured solution absorbs, which can be used to estimate concentration. A potometer measures water uptake by a shoot as a proxy for transpiration.
Biological work carries hazards. A hazard is something that could cause harm, such as a flame, a chemical or a living organism. The risk is the likelihood that harm will happen, given how the hazard is handled. Microbial cultures are grown with aseptic technique to keep unwanted organisms out, and they are sterilised before disposal, usually in an autoclave.
I jeszcze 20: otwórz dowolne z nich z powyższej listy.
Opinie
Nie ma jeszcze pisemnych opinii. Dodaj te notatki do swoich, a możesz być pierwszą osobą, która doda opinię.