Przejdź do treści

AP® Precalculus

AP · College BoardPrecalculus40 notatek w 4 folderach, 156 KB

40 notatek do nauki dla College Board AP Precalculus, utworzonych przez cookie, w 4 sekcjach zgodnych z tematami kursu.

Notes for AP® Precalculus (College Board, Course and Exam Description with the Fall 2026 clarifications), in folders for the four units in the course's order, with one note per topic. Unit 4 is excluded from the AP Exam, and its folder says so in each note.

Co zawiera

Pierwsza notatka

Polynomial and rational functions / Functions, covariation and rates of change

What a function is

A function is a rule that takes each input value to exactly one output value. The set of allowed input values is the domain, and the set of output values the rule produces is the range. The input is usually the independent variable, written xx or tt, and the output is the dependent variable, written f(x)f(x) or yy.

Two functions ff and gg are equal when they have the same domain and give the same output for every input in it, so f(a)=g(a)f(a) = g(a) for every aa in that domain. A function can be written as a formula, a table, a graph or a sentence, and all four describe the same rule when they agree.

Each input has an image, which is the single output the rule gives it. Each output has a preimage, which is the set of inputs that give that output. A function can have several inputs with the same output, so the preimage of a value can contain more than one number. For f(x)=x2f(x) = x^2, the image of −3-3 is 99, and the preimage of 99 is {−3,3}\{-3, 3\}.

How two quantities change together

Covariation is the idea that when the input changes, the output changes in a related way. The clearest picture is the graph, which shows every pair of input and output values as a point. Reading a graph left to right tells you how the output responds as the input grows.

A function is increasing on an interval when the output always goes up as the input goes up. Put formally, for any a<ba < b in the interval, f(a)<f(b)f(a) < f(b). It is decreasing when the output always goes down, so f(a)>f(b)f(a) > f(b). Both definitions need every pair of points in the interval, not just a few of them. A function that rises and then falls is increasing on one interval and decreasing on another.

Concavity describes how the change itself changes. A graph is concave up on an interval where the output changes by larger and larger amounts as the input increases, and concave down where the changes get smaller. A curve shaped like a cup is concave up, and one shaped like an upside-down cup is concave down.

A zero of a function is an input whose output is zero. On a graph these are the points where the curve crosses the horizontal axis.

Average rate of change

The average rate of change of ff over an interval [a,b][a, b] is the change in output divided by the change in input:

average rate of change=f(b)−f(a)b−a. \text{average rate of change} = \frac{f(b) - f(a)}{b - a}.

It is the constant rate that would produce the same total change over the same interval. Geometrically, it is the slope of the line through the two points (a,f(a))(a, f(a)) and (b,f(b))(b, f(b)), and that line is called a secant line.

For g(t)=t2g(t) = t^2 on [1,3][1, 3], we have g(1)=1g(1) = 1 and g(3)=9g(3) = 9, so

g(3)−g(1)3−1=9−12=4. \frac{g(3) - g(1)}{3 - 1} = \frac{9 - 1}{2} = 4.

The output increases by 88 over the interval, at an average of 44 units per unit of input. The average is not the rate at every point in between. The graph is steeper than 44 near t=3t = 3 and less steep than 44 near t=1t = 1.

The sign of an average rate of change says how the two quantities move together over the interval. A positive value means that the input and the output move in the same direction, so both increase or both decrease. A negative value means that as one increases, the other decreases.

Rate of change at a point

The rate of change at a single point t=at = a is what the output would do if the input changed from that point. It is approximated by average rates of change over shorter and shorter intervals that contain aa. If those averages settle towards one number, that number is the rate at the point.

For g(t)=t2g(t) = t^2 at t=1t = 1, the average rate over [1,1+h][1, 1 + h] is

g(1+h)−g(1)h=(1+h)2−1h=2h+h2h=2+h(h≠0). \frac{g(1+h) - g(1)}{h} = \frac{(1+h)^2 - 1}{h} = \frac{2h + h^2}{h} = 2 + h \qquad (h \neq 0).

As hh gets smaller, the average gets closer to 22, so the rate of change of gg at t=1t = 1 is 22. The same method at t=2t = 2 gives (2+h)2−4h=4+h\frac{(2+h)^2 - 4}{h} = 4 + h, which approaches 44, so the graph is steeper at t=2t = 2 than at t=1t = 1.

Working with averages over small intervals is the practical method, and it is also how a student checks a claim about a rate. When a graph or a table is given, the average over the nearest pair of values is the first estimate.

Two representations, one function

The same relationship can be read from different forms. A table gives input-output pairs and shows the behavior at those points only. A graph shows the whole shape but is read by eye. An equation gives exact values at any input. When you describe a function in words, say which quantity is the input and which is the output, and give units for both. "the input is the time in minutes and the output is the volume in cubic meters" tells the reader what the average rate is measured in.

For a tank that fills at a steady rate, the volume after tt minutes might be V(t)=0.4t+1V(t) = 0.4t + 1 in cubic meters. Its average rate of change over any interval is exactly 0.40.4 cubic meters per minute, because the function is linear. A quantity that fills faster at first and then slower has a rate of change that depends on where you look, and only the average over an interval gives a single number.

Checking a claim

A statement about a function can be tested with a value. "The function increases on [0,4][0, 4]" is false if one pair of points inside the interval goes the other way, and one counterexample is enough. "The average rate of change on [a,b][a, b] is mm" is checked by computing f(b)−f(a)b−a\frac{f(b) - f(a)}{b - a} and comparing. Using these two checks, and always stating which interval is meant, keeps the descriptions precise.

I jeszcze 39: otwórz dowolne z nich z powyższej listy.

Opinie

Nie ma jeszcze pisemnych opinii. Dodaj te notatki do swoich, a możesz być pierwszą osobą, która doda opinię.