AP Calculus AB
41 notatek do nauki dla College Board AP Calculus AB, utworzonych przez cookie, w 8 sekcjach zgodnych z tematami kursu.
Notes for AP Calculus AB (College Board), in folders for the eight units of the course framework in its order: limits and continuity, differentiation, applications of differentiation, integration, differential equations and applications of integration. Each note has definitions, theorems with their conditions, methods and worked examples for one topic. Delete any folder or note you don't need once the notes are yours.
Co zawiera
Pierwsza notatka
Limits and continuity / The limit idea and limit notation
From average change to change at an instant
The average rate of change of a function f over an interval from x=a to x=b is
the slope of the secant line through the two points on the graph. It divides the change in f by the change in x, so it is undefined when the two values of x coincide, because the denominator would be zero. That is the difficulty with asking how fast something is changing at a single instant: there is no interval, and the quotient becomes 00.
The way round it is to shrink the interval. If f(t) is the distance a car has travelled at time t, the average speed over t=2 to t=2.1, then over t=2 to t=2.01, then t=2 to t=2.001, forms a list of numbers that settles towards one value. That value is the speed at the instant t=2. A limit is the tool that makes this precise: it describes the value a quantity is approaching, without requiring that the quantity ever reaches it.
Definition and notation
Given a function f and a number c, the limit of f(x) as x approaches c is a real number L if f(x) can be made arbitrarily close to L by taking x sufficiently close to c, but not equal to c. It is written
The words "but not equal to c" matter. The limit records what happens near c and says nothing on its own about what happens at c. The function might be undefined at c, might have a value that differs from L, or might have the value L, and the limit is the same in all three cases. So limx→cf(x) and f(c) are different things, and keeping them apart is what the whole idea of continuity later rests on.
One-sided limits
Sometimes the values approached from the left of c differ from those approached from the right. The left-hand limit limx→c−f(x) uses only values with x<c, and the right-hand limit limx→c+f(x) uses only values with x>c. The two-sided limit exists, and equals L, exactly when both one-sided limits exist and both equal L:
A limit at an endpoint of a domain, such as limx→0+x, is necessarily one-sided, because the function does not exist on the other side.
Estimating limits from a graph
To read limx→cf(x) from a graph, follow the curve towards x=c from the left and then from the right, and note the height it heads for each time. The height of the point actually plotted at x=c plays no part.
Three situations come up repeatedly.
- A curve with an open circle at (c,L) and a filled dot at (c,M) with M=L: the limit is L, and f(c)=M.
- A curve with a hole at (c,L) and nothing at x=c: the limit is L, and f(c) does not exist.
- A curve that jumps, arriving at height p from the left and leaving from height q=p on the right: the one-sided limits are p and q, and the two-sided limit does not exist.
A graph drawn by a calculator or computer has a limited window and a limited resolution, so it can hide a short vertical jump or a very narrow spike near the point of interest. Zooming in and checking the function's formula are both safeguards against misreading a limit from a graph.
Estimating limits from a table
A table gives values of f at chosen inputs. To estimate limx→cf(x) from one, look at inputs on both sides of c that get progressively closer to it, and see whether the outputs head towards a single number.
For f(x)=x−3x2−9, which is undefined at x=3:
| x | 2.9 | 2.99 | 2.999 | 3.001 | 3.01 | 3.1 |
|---|---|---|---|---|---|---|
| f(x) | 5.9 | 5.99 | 5.999 | 6.001 | 6.01 | 6.1 |
Both sides approach 6, so the estimate is limx→3f(x)=6. The estimate is backed by algebra, since x−3x2−9=x+3 for x=3, but a table by itself is evidence rather than proof. A finite list of values cannot rule out behaviour that happens closer to c than the smallest gap tabulated, and a table with values on only one side of c cannot show that the two-sided limit exists.
When a limit does not exist
A limit fails to exist, as a real number, in three main ways.
- The one-sided limits disagree. For f(x)=x∣x∣, the function equals −1 for x<0 and 1 for x>0, so limx→0−f(x)=−1 and limx→0+f(x)=1, and limx→0f(x) does not exist.
- The function is unbounded near c. For f(x)=x1 as x→0, the values grow without bound in size, positive from the right and negative from the left. Even when both sides grow in the same direction, as for x21, there is no real-number limit. Such behaviour is described with infinite limits and vertical asymptotes.
- The function oscillates without settling. For f(x)=sin(x1) as x→0, the function swings between −1 and 1 infinitely often in any interval around 0, so it does not approach any one value.
Worked example
Let
Find limx→2f(x).
Approaching from the left uses the first rule, so limx→2−f(x)=2(2)+1=5. Approaching from the right uses the second rule, so limx→2+f(x)=7−2=5. The one-sided limits agree, so limx→2f(x)=5, and here this also equals f(2)=5.
Changing the second rule to 8−x gives a right-hand limit of 6 and a left-hand limit of 5, so the two-sided limit would not exist.
Interpreting limit statements
A limit statement can be read in words, as a graph feature or as a number in a table, and moving between these is part of the skill. limx→4f(x)=9 says that f(x) gets as close to 9 as one likes when x is taken close enough to 4 on either side, that the graph near x=4 heads for the height 9, and that table entries for x near 4 crowd round 9. It says nothing about f(4), which may be 9, may be another number, or may not exist.
I jeszcze 40: otwórz dowolne z nich z powyższej listy.
Opinie
Nie ma jeszcze pisemnych opinii. Dodaj te notatki do swoich, a możesz być pierwszą osobą, która doda opinię.