AP Calculus BC
46 notatek do nauki dla College Board AP Calculus BC, utworzonych przez cookie, w 10 sekcjach zgodnych z tematami kursu.
Notes for AP Calculus BC (College Board), in folders for the course's ten units in their order, from limits and differentiation through integration, differential equations and applications to parametric, polar and vector functions and infinite series. Each note has definitions, theorems with their conditions, methods and worked examples for one topic. Delete any folder or note you don't need once the notes are yours.
Co zawiera
Pierwsza notatka
Limits and continuity / Limits and limit techniques
What a limit says
The limit of f(x) as x approaches c is the number R that f(x) can be made arbitrarily close to by taking x sufficiently close to c, without letting x equal c. It is written
The value of f at c plays no part. The function may be undefined at c, or defined with a different value, and the limit is still decided only by what happens nearby. That is why limits are the tool for describing the behaviour of x−3x2−9 at x=3, where the expression itself is not defined.
A limit is a real number or it does not exist. Writing limx→cf(x)=∞ describes the way in which a limit fails to exist, and it is not a value.
One-sided limits
limx→c−f(x) is the limit as x approaches c from the left, using only values below c. limx→c+f(x) uses only values above c. The two-sided limit exists exactly when both one-sided limits exist and are equal:
For f(x)=2x−1 when x<3 and f(x)=x2−6 when x≥3, the left limit at 3 is 2(3)−1=5 and the right limit is 9−6=3. They differ, so limx→3f(x) does not exist, even though f(3)=3 is defined.
Ways a limit can fail to exist
There are three common reasons.
- The one-sided limits exist but are different, as in the jump above. A graph shows this as a break with the two sides ending at different heights.
- The function is unbounded near c. For x1 at 0 the values grow without bound on the right and fall without bound on the left.
- The function oscillates without settling. sin(x1) as x→0 swings between −1 and 1 infinitely often however close x gets to 0, so no single value is approached.
Estimating limits from graphs and tables
On a graph, follow the curve towards x=c from each side and read the height it is heading for. An open circle at x=c means the function is not defined or takes a different value there, and the limit is the height of the hole. A graph drawn at a fixed scale can hide behaviour, such as a very fast oscillation or a narrow spike, so a graph supports an estimate and does not prove one.
From a table, choose values of x closer and closer to c on both sides and watch the outputs. For xex−1 near 0:
| x | −0.01 | −0.001 | 0.001 | 0.01 |
|---|---|---|---|---|
| xex−1 | 0.99502 | 0.99950 | 1.00050 | 1.00502 |
The outputs close in on 1 from both sides, so the limit is estimated as 1. A table with values from only one side can only estimate the one-sided limit. A trend across a few values is evidence and not a guarantee.
Limit laws
If limx→cf(x)=L and limx→cg(x)=M both exist as real numbers, then
For a composite function, limx→cf(g(x))=f(limx→cg(x)) when f is continuous at that limit of g. Polynomials, rational functions (where the denominator is not zero), nx, sinx, cosx, ex and lnx are continuous on their domains, so their limits at a point of the domain are found by substituting. For instance limx→2x+3x2+1=55=1.
When substitution gives 00
Substituting x=c can give 00. This is an indeterminate form and says nothing about the limit yet: the expression has to be rewritten first. The rewriting works because limits ignore the value at c itself, so a common factor that vanishes at c can be cancelled.
Factoring
Multiplying by a conjugate
When a square root sits in the numerator or denominator, multiplying the top and bottom by the conjugate removes it:
Combining fractions
Trigonometric identities
Two limits are used repeatedly:
They extend to other multiples of the variable by rescaling. For limx→0xsin3x, write xsin3x=3⋅3xsin3x, and since 3x→0 as x→0, the limit is 3⋅1=3.
If substitution gives a nonzero number over zero, such as 05, the expression is not indeterminate. The function is unbounded near c and the limit is either infinite or does not exist.
The squeeze theorem
If g(x)≤f(x)≤h(x) for all x near c (except possibly at c), and limx→cg(x)=limx→ch(x)=L, then limx→cf(x)=L.
It is used when the function is trapped between two simpler ones. To find limx→0x2sin(x1), note that −1≤sin(x1)≤1 for x=0, and multiplying by x2≥0 gives
Both −x2 and x2 tend to 0 as x→0, so the limit is 0. Without the factor x2, sin(x1) has no limit at 0, so the squeeze is what tames the oscillation.
The two trigonometric limits above are themselves proved by squeezing, using a comparison of areas in a unit circle.
Choosing a method
Try substitution first. If the result is a number, it is the limit, provided the function is continuous there. If it is 00, look for a factor to cancel, a conjugate to multiply by, a fraction to combine or a trigonometric identity to apply. If the expression involves a bounded oscillating factor multiplied by something that tends to zero, consider the squeeze theorem. For piecewise functions, or at a point where the formula changes, work out each one-sided limit separately. Where the form is 00 or ∞∞ and the expression is differentiable, L'Hospital's rule gives another route once derivatives are available.
I jeszcze 45: otwórz dowolne z nich z powyższej listy.
Opinie
Nie ma jeszcze pisemnych opinii. Dodaj te notatki do swoich, a możesz być pierwszą osobą, która doda opinię.