Przejdź do treści

OCR GCSE Design and Technology

GCSE · OCRDesign and Technology479 fiszek

479 fiszek, przygotowane przez cookie, w 50 podzestawach z tematami zgodnymi z kursem.

Ucz się z tych kart

Wybrane dla tego samego kursu na podstawie tego, z czego ludzie najczęściej korzystają. Wszystko można przeczytać bez konta.

Wszystko dla Design and Technology

Szukasz pomocy z Design and Technology?

Cookie Tutoring, nasza własna usługa korepetycji, może mieć korepetytorów z przedmiotu Design and Technology. Lekcje odbywają się na żywo i indywidualnie, a pierwsze 15 minut z każdym korepetytorem jest bezpłatne.

Znajdź korepetytora

Flashcards for OCR GCSE Design and Technology (J310, Version 2.0), split into the specification's eight topic areas and then by topic, with a subdeck for each in-depth material area (papers and boards, timber, metals, polymers, textiles, and systems and mechanisms for design engineering) and a subdeck of the maths the exam requires. Delete or suspend any in-depth material subdeck you are not studying.

Dodając zestaw, otrzymasz własną kopię wraz ze wszystkimi podzestawami. Każda fiszka będzie wracać tuż przed tym, jak miałbyś(-abyś) ją zapomnieć, a każda odpowiedź dobra lub zła wpłynie na poziom opanowania danego tematu. Gdy zestaw będzie już twój, możesz usunąć lub zawiesić te części, których się nie uczysz.

Co zawiera (50 podzestawów)

  • 1. Identifying requirements23 fiszki
    • 1.1 Exploring a context13 fiszek
    • 1.2 Usability10 fiszek
  • 2. Learning from existing products and practice16 fiszek
    • 2.1 Learning from existing products10 fiszek
    • 2.2 New and emerging technologies6 fiszek
  • 3. Implications of wider issues21 fiszek
    • 3.1 Impacts of new and emerging technologies6 fiszek
    • 3.2 Sources of energy9 fiszek
    • 3.3 Environmental, social and economic influences6 fiszek
  • 4. Design thinking and communication12 fiszek
    • 4.1 Communicating design solutions7 fiszek
    • 4.2 Design approaches5 fiszek
  • 5. Material considerations161 fiszek
    • 5.1 Categories of materials13 fiszek
    • 5.2 Properties and material selection33 fiszki
    • 5.3 Sources, origins and lifecycle11 fiszek
    • 5.4 Stock forms and standard components9 fiszek
    • 5.5 In-depth: papers and boards13 fiszek
    • 5.6 In-depth: timber22 fiszki
    • 5.7 In-depth: metals16 fiszek
    • 5.8 In-depth: polymers15 fiszek
    • 5.9 In-depth: textile fibres and fabrics18 fiszek
    • 5.10 In-depth: systems and mechanical components11 fiszek
  • 6. Technical understanding40 fiszek
    • 6.1 Structural integrity7 fiszek
    • 6.2 Finishing6 fiszek
    • 6.3 Movement and mechanisms16 fiszek
    • 6.4 Electronic systems11 fiszek
  • 7. Manufacturing processes and techniques149 fiszek
    • 7.1 Iterative models4 fiszki
    • 7.2 Ways of shaping and joining materials8 fiszek
    • 7.3 Accuracy when making7 fiszek
    • 7.4 Digital design tools7 fiszek
    • 7.5 Scales of production10 fiszek
    • 7.6 New and emerging technologies in production4 fiszki
    • 7.7 In-depth: making with papers and boards14 fiszek
    • 7.8 In-depth: making with timber34 fiszki
    • 7.9 In-depth: making with metals21 fiszek
    • 7.10 In-depth: making with polymers16 fiszek
    • 7.11 In-depth: making with textiles14 fiszek
    • 7.12 In-depth: making for design engineering10 fiszek
  • 8. Viability of design solutions10 fiszek
    • 8.1 Cost and commercial viability4 fiszki
    • 8.2 Calculating cost, quantities and sizes6 fiszek
  • Mathematical skills for design and technology47 fiszek
    • M1 Arithmetic and numerical computation23 fiszki
    • M2 Handling data6 fiszek
    • M3 Graphs5 fiszek
    • M4 Geometry and trigonometry13 fiszek

Niektóre fiszki z tego zestawu

  • Primary user
    The person or group of people that a product or system is intended to be practically used by
  • When a designer critiques an existing product, which materials-related feature should they consider?
    The materials, components and processes that have been used to make it
  • An alternative to a make, use, dispose economy, where materials and products are kept in use for as long as possible and recovered at the end of their life instead of thrown away
    Circular economy
  • What is the purpose of a 2D or 3D sketch with notes in a design portfolio?
    To communicate an idea, modification or technical consideration clearly to someone else
  • Products are usually made from how many materials?
    Multiple materials, not just one
  • Why might a material or component need to be reinforced or stiffened?
    So it can withstand the forces and stresses acting on it without failing
  • Why do designers make early models and toiles while developing a design?
    To support iterative designing, by testing and refining an idea before committing to the final material or scale
  • Why is the cost of materials and components significant to a product's commercial viability?
    A product that costs too much to make may not be affordable or profitable to sell
  • What does writing a number in standard form mean?
    Writing it as a number between 1 and 10 multiplied by a power of 10
  • Stakeholder
    A person, group or business with an interest in a design project, beyond just its primary user

I jeszcze 469, gdy dodasz talię.