Przejdź do treści

Edexcel GCSE Design & Technology

GCSE · EdexcelDesign & Technology805 fiszek

805 fiszek, przygotowane przez cookie, w 67 podzestawach z tematami zgodnymi z kursem.

Ucz się z tych kart

Wybrane dla tego samego kursu na podstawie tego, z czego ludzie najczęściej korzystają. Wszystko można przeczytać bez konta.

Wszystko dla Design and Technology

Szukasz pomocy z Design and Technology?

Cookie Tutoring, nasza własna usługa korepetycji, może mieć korepetytorów z przedmiotu Design and Technology. Lekcje odbywają się na żywo i indywidualnie, a pierwsze 15 minut z każdym korepetytorem jest bezpłatne.

Znajdź korepetytora

Flashcards for Edexcel GCSE Design and Technology (1DT0), split into Core content and then a subdeck for each material category (Metals, Papers and boards, Polymers, Systems, Textiles, Timbers), in the specification's order. Delete or suspend the material category subdecks your course does not study, keeping only Core content and your own.

Dodając zestaw, otrzymasz własną kopię wraz ze wszystkimi podzestawami. Każda fiszka będzie wracać tuż przed tym, jak miałbyś(-abyś) ją zapomnieć, a każda odpowiedź dobra lub zła wpłynie na poziom opanowania danego tematu. Gdy zestaw będzie już twój, możesz usunąć lub zawiesić te części, których się nie uczysz.

Co zawiera (67 podzestawów)

  • Core content330 fiszek
    • 1.1 The impact of new and emerging technologies39 fiszek
    • 1.2 Evaluating new and emerging technologies21 fiszek
    • 1.3 How energy is generated and stored17 fiszek
    • 1.4 Modern and smart materials, composites and technical textiles30 fiszek
    • 1.5 Mechanical devices that produce movement45 fiszek
    • 1.6 Electronic systems, sensors and control devices13 fiszek
    • 1.7 Using programmable components6 fiszek
    • 1.8 Ferrous and non-ferrous metals14 fiszek
    • 1.9 Papers and boards12 fiszek
    • 1.10 Thermoforming and thermosetting polymers13 fiszek
    • 1.11 Fibres and fabrics16 fiszek
    • 1.12 Natural and manufactured timbers10 fiszek
    • 1.13 Materials, components and processes across contexts40 fiszek
    • 1.14 Environmental, social and economic challenges12 fiszek
    • 1.15 Investigating the work of others7 fiszek
    • 1.16 Design strategies7 fiszek
    • 1.17 Communicating and recording design ideas11 fiszek
    • 1.18 Mathematics and science for design and technology17 fiszek
  • Metals79 fiszek
    • 2.2 Sources, properties and footprint of metals24 fiszki
    • 2.3 Selecting metals7 fiszek
    • 2.4 Forces, stresses and reinforcement of metals11 fiszek
    • 2.5 Stock forms and sizes of metals12 fiszek
    • 2.6 Manufacturing metal products5 fiszek
    • 2.7 Shaping, fabricating and assembling metals12 fiszek
    • 2.8 Finishing metals8 fiszek
  • Papers and boards78 fiszek
    • 3.2 Sources, properties and footprint of papers and boards30 fiszek
    • 3.3 Selecting papers and boards8 fiszek
    • 3.4 Forces, stresses and reinforcement of papers and boards8 fiszek
    • 3.5 Stock forms and sizes of papers and boards9 fiszek
    • 3.6 Manufacturing paper and board products7 fiszek
    • 3.7 Shaping and fabricating papers and boards11 fiszek
    • 3.8 Finishing papers and boards5 fiszek
  • Polymers61 fiszek
    • 4.2 Sources, properties and footprint of polymers22 fiszki
    • 4.3 Selecting polymers6 fiszek
    • 4.4 Forces, stresses and reinforcement of polymers5 fiszek
    • 4.5 Stock forms and sizes of polymers9 fiszek
    • 4.6 Manufacturing polymer products6 fiszek
    • 4.7 Shaping, fabricating and assembling polymers8 fiszek
    • 4.8 Finishing polymers5 fiszek
  • Systems66 fiszek
    • 5.2 Sources, properties and footprint of components and systems31 fiszek
    • 5.3 Selecting components and systems5 fiszek
    • 5.4 Forces, stresses and reinforcement in systems4 fiszki
    • 5.5 Stock forms and sizes for systems14 fiszek
    • 5.6 Manufacturing components and systems3 fiszki
    • 5.7 Shaping and assembling systems6 fiszek
    • 5.8 Finishing components and systems3 fiszki
  • Textiles114 fiszek
    • 6.2 Sources, properties and footprint of textiles33 fiszki
    • 6.3 Selecting textiles7 fiszek
    • 6.4 Forces, stresses and reinforcement of textiles7 fiszek
    • 6.5 Stock forms and sizes of textiles9 fiszek
    • 6.6 Manufacturing textile products5 fiszek
    • 6.7 Shaping, fabricating and assembling textiles20 fiszek
    • 6.8 Finishing textiles33 fiszki
  • Timbers77 fiszek
    • 7.2 Sources, properties and footprint of timbers24 fiszki
    • 7.3 Selecting timbers7 fiszek
    • 7.4 Forces, stresses and reinforcement of timbers5 fiszek
    • 7.5 Stock forms and sizes of timbers8 fiszek
    • 7.6 Manufacturing timber products4 fiszki
    • 7.7 Shaping, fabricating and assembling timbers23 fiszki
    • 7.8 Finishing timbers6 fiszek

Niektóre fiszki z tego zestawu

  • How can new manufacturing technology cause unemployment?
    Automation and machines can replace jobs that people used to do
  • What is high carbon steel?
    A ferrous metal, an alloy of iron with more carbon than mild steel, making it harder but more brittle
  • What is bond paper?
    A strong, good-quality writing and printing paper
  • What is rigid polystyrene (PS)?
    A hard, brittle, lightweight thermoforming polymer, often used for CD cases and disposable cutlery
  • What does a moisture sensor detect?
    The level of water or dampness present
  • What natural animal fibre is silk?
    A fibre produced by silkworms to make their cocoons
  • What are the properties of jelutong?
    A pale, straight-grained hardwood that is light and easy to carve, but not very durable
  • Why might a new technology change the skills a workforce needs?
    Workers may need retraining to operate new equipment, or old skills may no longer be needed
  • What is tungsten steel?
    A ferrous metal alloyed with tungsten, giving it very high hardness and heat resistance, used for cutting tools
  • What is heat transfer printing paper used for?
    Printing a design that is then transferred onto fabric using heat, in sublimation printing

I jeszcze 795, gdy dodasz talię.