Przejdź do treści

AQA A-Level Design and Technology: Product Design

A-Level · AQADesign and Technology1354 fiszki

1354 fiszki dla AQA A-Level Design and Technology, przygotowane przez cookie, w 57 podzestawach z tematami zgodnymi z kursem.

Ucz się z tych kart

Wybrane dla tego samego kursu na podstawie tego, z czego ludzie najczęściej korzystają. Wszystko można przeczytać bez konta.

Wszystko dla Design and Technology

Szukasz pomocy z Design and Technology?

Cookie Tutoring, nasza własna usługa korepetycji, może mieć korepetytorów z przedmiotu Design and Technology. Lekcje odbywają się na żywo i indywidualnie, a pierwsze 15 minut z każdym korepetytorem jest bezpłatne.

Znajdź korepetytora

Flashcards for AQA A-level Design and Technology: Product Design (7552), split into Technical principles and Designing and making principles, then by the specification's numbered sections, with materials, processes, industrial practice, designers, standards and the maths skills. Delete or suspend any subdeck your course leaves out once the deck is yours.

Dodając zestaw, otrzymasz własną kopię wraz ze wszystkimi podzestawami. Każda fiszka będzie wracać tuż przed tym, jak miałbyś(-abyś) ją zapomnieć, a każda odpowiedź dobra lub zła wpłynie na poziom opanowania danego tematu. Gdy zestaw będzie już twój, możesz usunąć lub zawiesić te części, których się nie uczysz.

Co zawiera (57 podzestawów)

  • Designing and making principles398 fiszek
    • 3.2.1 Design methods and processes27 fiszek
    • 3.2.2 Design theory51 fiszek
    • 3.2.3 How technology and cultural changes impact on designers33 fiszki
    • 3.2.4 Design processes31 fiszek
    • 3.2.5 Critical analysis and evaluation27 fiszek
    • 3.2.6 Selecting appropriate tools, equipment and processes24 fiszki
    • 3.2.7 Accuracy in design and manufacture26 fiszek
    • 3.2.8 Responsible design23 fiszki
    • 3.2.9 Design for manufacture and project management28 fiszek
    • 3.2.10 National and international standards in product design26 fiszek
    • Maths skills80 fiszek
      • Areas, volumes and density14 fiszek
      • Graphs, charts and statistics13 fiszek
      • Machining and manufacturing calculations10 fiszek
      • Number and percentages16 fiszek
      • Ratios and scale10 fiszek
      • Trigonometry and geometry17 fiszek
    • Science knowledge22 fiszki
  • Technical principles956 fiszek
    • 3.1.1 Materials and their applications95 fiszek
      • Classification of materials41 fiszek
      • Material properties39 fiszek
      • Testing materials15 fiszek
    • 3.1.2 Performance characteristics of materials294 fiszki
      • Composites, smart and modern materials51 fiszek
      • Elastomers and biodegradable polymers27 fiszek
      • Metals64 fiszki
      • Papers and boards29 fiszek
      • Polymer based sheet and film18 fiszek
      • Polymers42 fiszki
      • Woods63 fiszki
    • 3.1.3 Enhancement of materials36 fiszek
    • 3.1.4 Forming, redistribution and addition processes167 fiszek
      • Adhesives and fixings12 fiszek
      • Jigs and fixtures10 fiszek
      • Metal forming27 fiszek
      • Metal joining29 fiszek
      • Metal wasting15 fiszek
      • Paper and board forming11 fiszek
      • Polymer forming36 fiszek
      • Wood joining and forming27 fiszek
    • 3.1.5 The use of finishes69 fiszek
      • Metal finishes21 fiszek
      • Paper and board finishes14 fiszek
      • Polymer finishes7 fiszek
      • Printing processes13 fiszek
      • Wood finishes14 fiszek
    • 3.1.6 Modern industrial and commercial practice44 fiszki
    • 3.1.7 Digital design and manufacture44 fiszki
    • 3.1.8 The requirements for product design and development24 fiszki
    • 3.1.9 Health and safety32 fiszki
    • 3.1.10 Protecting designs and intellectual property29 fiszek
    • 3.1.11 Design for manufacturing, maintenance, repair and disposal42 fiszki
    • 3.1.12 Feasibility studies20 fiszek
    • 3.1.13 Enterprise and marketing in the development of products29 fiszek
    • 3.1.14 Design communication31 fiszek

Niektóre fiszki z tego zestawu

  • What is user centred design?
    An approach that puts the needs, wants and abilities of the people who will use the product at the centre of every decision
  • What is a ferrous metal?
    A metal that contains iron
  • What is the difference between a need and a want in design?
    A need is essential for the user, and a want is a desire that is not essential
  • What is a non-ferrous metal?
    A metal that contains no iron
  • What is a value in design?
    A belief such as fairness or sustainability that a user wants a product to respect
  • Why are most ferrous metals magnetic and prone to rusting, while non-ferrous metals are not?
    Iron is magnetic and reacts with oxygen and water to form rust, and non-ferrous metals contain none
  • Information gathered first-hand by the designer, such as from a survey or interview
    Primary data
  • A mixture of a metal with one or more other elements, made to improve its properties
    Alloy
  • Information already collected by someone else, such as books, websites and reports
    Secondary data
  • Why is a metal alloyed with another element?
    To improve properties such as strength, hardness or corrosion resistance

I jeszcze 1344, gdy dodasz talię.