콘텐츠로 건너뛰기

Cambridge IGCSE International Maths

IGCSE · Cambridge International (CAIE)International Maths노트 32개, 폴더 10개, 134 KB

cookie가 만든 Cambridge International (CAIE) IGCSE International Maths 복습 노트 32개예요. 과정의 주제에 따라 10개 섹션으로 구성돼요.

Notes for Cambridge IGCSE International Maths (0607), syllabus for 2025 to 2027, in folders for the ten topic areas in the syllabus order. Core content is covered throughout, and the Extended-only content is marked where it sits. Delete any folder your course leaves out once the notes are yours.

포함된 내용

첫 번째 노트

Number / Types of number and sets

Every number belongs to one or more named families, and the families decide which operations and results apply. Knowing the names is the first step, because a question about "prime numbers" or "integers" is asking you to use a particular set of facts.

Families of numbers

The natural numbers are the counting numbers together with zero: 0, 1, 2, 3 and so on. The integers extend them to negative whole numbers, so …,−2,−1,0,1,2,…\ldots, -2, -1, 0, 1, 2, \ldots are all integers. A number that can be written as a fraction pq\frac{p}{q} with pp and qq integers and q≠0q \neq 0 is rational. A number that cannot is irrational. Decimals that stop, such as 0.750.75, and decimals that repeat, are rational. The square root of 2 and the number π\pi are irrational, and a decimal approximation of either is a rational number that is not equal to it.

Some families are built from patterns:

NameFirst fewRule
Square numbers1, 4, 9, 16, 25n×nn \times n
Cube numbers1, 8, 27, 64, 125n×n×nn \times n \times n
Triangle numbers1, 3, 6, 10, 15, 21n(n+1)2\frac{n(n+1)}{2}
Prime numbers2, 3, 5, 7, 11, 13exactly two factors, 1 and itself

The number 1 is not prime, because it has only one factor. Two is the only even prime.

The reciprocal of a number xx is 1x\frac{1}{x}, so the reciprocal of 4 is 14\frac{1}{4} and the reciprocal of 23\frac{2}{3} is 32\frac{3}{2}. Multiplying a number by its reciprocal always gives 1. Zero has no reciprocal, because 10\frac{1}{0} is not defined.

Factors, multiples, HCF and LCM

A factor of a number divides it exactly, and a multiple is a number that the given number divides into exactly. Writing a number as a product of primes makes the factors clear. So 72=23×3272 = 2^3 \times 3^2 and 108=22×33108 = 2^2 \times 3^3.

The highest common factor (HCF) takes the lowest power of each prime that appears in both, and the lowest common multiple (LCM) takes the highest power of each prime that appears in either:

HCF(72,108)=22×32=36LCM(72,108)=23×33=216 \begin{aligned} \text{HCF}(72, 108) &= 2^2 \times 3^2 = 36 \\ \text{LCM}(72, 108) &= 2^3 \times 3^3 = 216 \end{aligned}

As a check, the HCF times the LCM is 36×216=777636 \times 216 = 7776, which is 72×10872 \times 108.

Factors come in pairs that multiply to the number. The factors of 36 are 1 and 36, 2 and 18, 3 and 12, 4 and 9, and 6 and 6. Listing the pairs this way is a quick way to be sure none is missed.

Sets

A set is a collection of distinct objects, written inside braces. The universal set UU contains everything under consideration, and n(A)n(A) is the number of elements in a set AA. Three further symbols are used:

  • A′A' is the complement of AA: everything in UU that is not in AA.
  • A∪BA \cup B is the union: everything in AA or in BB or in both.
  • A∩BA \cap B is the intersection: everything in both AA and BB.

Take U={1,2,…,10}U = \{1, 2, \ldots, 10\}, A={2,4,6,8,10}A = \{2, 4, 6, 8, 10\} and B={3,6,9}B = \{3, 6, 9\}. Then A∩B={6}A \cap B = \{6\}, A∪B={2,3,4,6,8,9,10}A \cup B = \{2, 3, 4, 6, 8, 9, 10\}, so n(A∪B)=7n(A \cup B) = 7, and A′={1,3,5,7,9}A' = \{1, 3, 5, 7, 9\}. The count n(A∪B)=n(A)+n(B)−n(A∩B)=5+3−1=7n(A \cup B) = n(A) + n(B) - n(A \cap B) = 5 + 3 - 1 = 7 agrees with the list. Subtracting the intersection is needed because 6 would otherwise be counted twice.

A Venn diagram shows the sets as overlapping regions. Each region holds the elements that belong to exactly the sets that enclose it, and the outside of every set is the complement. Working from the inside out is the reliable order: write the number in the intersection first, then the numbers that belong only to each set, then the number in neither, which is what remains of the universal set.

Extended only: the symbol ∈\in means "is an element of" and ∉\notin means "is not an element of". ∅\emptyset is the empty set, which has no elements. A⊆BA \subseteq B means that every element of AA is also in BB, and A⊈BA \not\subseteq B means that at least one element of AA is not in BB. Extended only: a Venn diagram can show three sets, and the number of elements in their union is

n(A∪B∪C)=n(A)+n(B)+n(C)−n(A∩B)−n(A∩C)−n(B∩C)+n(A∩B∩C). n(A \cup B \cup C) = n(A) + n(B) + n(C) - n(A \cap B) - n(A \cap C) - n(B \cap C) + n(A \cap B \cap C).

For example, if n(A)=15n(A) = 15, n(B)=12n(B) = 12, n(C)=10n(C) = 10, the three pairwise intersections have 6, 4 and 5 elements, and the triple intersection has 2, then the union has 15+12+10−6−4−5+2=2415 + 12 + 10 - 6 - 4 - 5 + 2 = 24 elements. The triple intersection is added back because it was removed three times in the pairwise subtractions and so must be restored once.

Describing a set

A set can be given by listing its elements, or by a rule. For example, A={x∣x is a natural number}A = \{x \mid x \text{ is a natural number}\} reads as "the set of xx such that xx is a natural number", and C={x∣a⩽x⩽b}C = \{x \mid a \leqslant x \leqslant b\} is every number between aa and bb inclusive. A set written with dots, such as B={a,b,c,…}B = \{a, b, c, \ldots\}, shows the pattern and the sequence continues.

그 밖에 31개 더 있어요. 위 목록에서 원하는 항목을 열어 보세요.

평가

아직 작성된 후기가 없어요. 이 노트를 내 노트에 추가하면 가장 먼저 후기를 남길 수 있어요.