Langsung ke konten

NZQA NCEA Level 1 Mathematics and Statistics

Ncea Level 1 · NZQAMathematics and Statistics26 catatan dalam 4 folder, 128 KB

26 catatan belajar untuk NZQA Ncea Level 1 Mathematics and Statistics, dibuat oleh cookie, dalam 4 bagian yang mengikuti topik kursus.

Notes for NZQA NCEA Level 1 Mathematics and Statistics, following the 2027 specification for achievement standards 91946 and 91947 and the internal statistical enquiry and modelling content. In folders for statistics in context, number and algebra, measurement, geometry and space, and statistical enquiry and modelling, with right-angled trigonometry only as the specification sets it.

Isi di dalamnya

Catatan pertama

Statistics in context / Reading displays

Most data in the news, on a council website or in a company report arrives as a picture. Before you can say anything about it you need to know what the picture is showing, which means reading the title, the axis labels and the units, then the shape of the display itself.

Start with the labels

Every display has a title, a variable name, units and a source. Read these first. A bar graph of "cost" tells you nothing until you know whether the units are dollars, dollars per month or dollars per hour. The source tells you who collected the data and whether they had a reason to present it in a particular way. The sample size, often written as nn, tells you how much weight to give a feature of the display: a bump in a display of 12 values may be nothing, while the same bump in 400 values is more likely to be real.

Check the scale too. Whether an axis starts at zero, what the gap between ticks is, and whether the scale is the same on two displays you are comparing all change how the display looks.

Dot plots

A dot plot puts one dot above a number line for each value, so a value that occurs three times has three dots stacked above it. The stacks show the frequency directly, and the gaps and clusters show where the values are.

Suppose the number of text messages sent by 14 people on a Tuesday is recorded as 3, 5, 5, 6, 7, 7, 7, 8, 9, 9, 12, 13, 13, 20. On a dot plot the stack of three dots at 7 is the tallest, so 7 is the most common value. The value 20 sits alone at the right, which makes it stand out from the rest.

Histograms

A histogram shows numerical data grouped into intervals. The bars touch, because the values run on continuously across the axis, and the width of each bar is the size of its interval. When every bar has the same width, the height of a bar is the frequency of values in that interval. When the widths differ, the area of a bar is the frequency, so a wide bar with a low height can hold as many values as a narrow tall one. Read the vertical axis to find out which case you have.

A histogram of ages in intervals of 10 years, with a bar from 20 up to 30 reaching a height of 14, tells you that 14 people were aged from 20 up to, but not including, 30. It does not tell you how old any one of them was.

Bar graphs

A bar graph compares separate categories, such as sports, towns or brands. The bars do not touch, and their order can be alphabetical, by size or by a natural order such as months. Ordering the bars by size usually makes a comparison easier to read. A bar graph with a vertical axis that does not start at zero can make small differences look large, which is covered in the note on media and claims.

Box plots

A box plot shows five numbers: the minimum, the lower quartile, the median, the upper quartile and the maximum. The box runs from the lower quartile to the upper quartile, so its length is the interquartile range, and a line inside the box shows the median. The two whiskers reach out to the minimum and maximum. A long whisker or a long box shows more spread, and the position of the median within the box shows whether the middle half of the data sits towards one end.

Frequency tables and reading values

A frequency table lists the values or intervals with the count for each. You can often answer a question from a table faster than from a display. To find the number of values above a threshold, add the frequencies for the categories above it. To find a percentage, divide the count by the total and multiply by 100.

Take a survey of 50 households with these counts of cars owned: 0 cars, 9 households; 1 car, 22 households; 2 cars, 14 households; 3 or more cars, 5 households. How many households own at least two cars, and what percentage is that?

at least two cars=14+5=191950×100=38% \begin{aligned} \text{at least two cars} &= 14 + 5 = 19 \\ \frac{19}{50} \times 100 &= 38\% \end{aligned}

So 19 households, or 38% of the 50, own at least two cars. Notice that the top category is "3 or more", so it contributes to "at least two" without telling you the exact number of cars in those five homes.

Reading a value off a display

When a question asks you to read a value, find the bar, dot or point, then read against the scale and say the answer with its units. If the value falls between two ticks, estimate it and say that it is an estimate. Reading a histogram gives an interval, not a single value, and reading a box plot gives the quartiles and median only to the accuracy of the scale.

Be careful not to over-claim. "About 40 people" is an honest reading of a bar that sits just under the 40 line. "Exactly 40 people" is not, unless the table says so.

Describing what a display shows

A description of a display names the variable, the units and the main feature, and says something about the shape or the spread. A statement such as "most households own one or two cars, and a few own none" is a description. "Car ownership is high" is an opinion that the display may or may not support. Keep the description to what the display shows, and keep any reason for it separate.

Dan 25 lainnya: buka yang kamu mau dari daftar di atas.

Ulasan

Belum ada ulasan tertulis. Tambahkan catatan ini ke catatanmu dan jadilah yang pertama memberi ulasan.