Saltar al contenido

Eduqas GCSE Geology

GCSE · EduqasGeology18 notas en 6 carpetas, 62 KB

18 apuntes de estudio, creados por cookie, en 6 secciones que siguen los temas del curso.

Notes for Eduqas GCSE Geology, in folders for the specification's four Key Ideas in its order, then the mathematical and practical skills it lists. Each note covers one topic, with worked examples. Delete any folder your course leaves out once the notes are yours.

Qué contiene

La primera nota

Rock exposures / Minerals and how to identify them

A mineral is a naturally occurring solid with a definite chemical make-up and a regular internal arrangement of atoms. Rocks are mixtures of minerals, so the minerals in a rock tell you how the rock formed. Four of the commonest processes that make minerals are worth knowing by their examples.

How minerals form

Crystallisation from a melt is the process behind the minerals of igneous rock. As magma or lava cools, atoms settle into crystal lattices. Quartz, feldspar, mica, olivine and augite all form this way.

Metamorphic recrystallisation happens when existing rock is heated or squeezed until its minerals reorganise into new ones without melting. Calcite and garnet are typical products. The same rock can keep its chemical ingredients but grow entirely different crystals.

Crystallisation from solution happens when water evaporates and leaves dissolved salts behind. Halite, which is rock salt, forms this way in shallow basins that dry out.

Crystallisation as cement happens when mineral-rich water flows through the spaces between sediment grains and deposits minerals there. Quartz and calcite are the usual cements, and they bind loose grains into solid rock.

Hydrothermal fluids are hot water rich in dissolved minerals, often moving through cracks. When they cool and deposit minerals in veins and faults, the minerals fall into two groups. Ore minerals contain a metal that can be extracted economically, such as haematite (an ore of iron, Fe2O3\mathrm{Fe_2O_3}) and galena (lead sulphide, PbS\mathrm{PbS}). Gangue minerals are the valueless minerals that come with them, such as quartz and calcite.

Testing a mineral

Geologists identify minerals by their physical properties, which can be observed on a hand specimen without any special equipment.

  • Colour is the easiest property to see, but many minerals share colours, so it is a weak test on its own.
  • Streak is the colour of the powder left when the mineral is rubbed across unglazed porcelain. Haematite leaves a red-brown streak, whatever its surface colour.
  • Lustre describes how the surface reflects light, such as glassy (quartz) or metallic (galena).
  • Cleavage is the tendency to break along flat, smooth planes. Halite breaks into cubes.
  • Density can be judged by hefting a specimen in the hand. Galena is much denser than quartz, so two similar-looking grains can be separated this way.

A second test uses reaction with dilute hydrochloric acid of 0.5 mol dm−3^{-3} concentration. Calcite fizzes strongly, because the acid releases carbon dioxide from its carbonate. Quartz does not react. Any rock containing calcite, including limestone and marble, shows the same fizz.

Hardness

The Mohs scale ranks minerals by how well they resist being scratched. Each mineral on the scale scratches those below it. The scale runs from talc (1) to diamond (10), and the intermediate values are gypsum (2), calcite (3), fluorite (4), apatite (5), orthoclase feldspar (6), quartz (7), topaz (8) and corundum (9).

In the field or laboratory, the scale is tested with objects of known hardness. A fingernail is about 2.5, a copper coin about 3, and a steel pin about 5.5.

Worked example. A grain is scratched by a copper coin but not by a steel pin. Its hardness must be more than about 3 and less than about 5.5. Calcite (3) and fluorite (4) both fit, so a second test is needed, such as the acid test: a fizz points to calcite.

Putting the tests together

No single test identifies a mineral with certainty. A student who records colour, streak, lustre, cleavage, hardness and reaction with acid for a sample can compare the list against the minerals on a data sheet and find the one that fits every entry. Where two minerals agree on most entries, the test that separates them is the one to use next.

Galena and quartz show this well. Both can be grey-white and both may be glassy in places, but galena has a metallic lustre, a dense feel and cubic cleavage, while quartz has a glassy lustre, a light feel and no cleavage.

Y 17 más: abre cualquiera desde la lista de arriba.

Reseñas

Todavía no hay reseñas escritas. Añade estas notas a las tuyas y podrás ser la primera persona en dejar una.