Cambridge IGCSE ICT
34 Lernnotizen für Cambridge International (CAIE) IGCSE ICT, von cookie erstellt, in 13 Abschnitten, die den Themen des Kurses folgen.
Notes for Cambridge IGCSE Information and Communication Technology (0417), in folders for the syllabus's content areas in its order: computer systems, networks, applications, the systems life cycle, safety and security, document production, databases, presentations, spreadsheets and website authoring. Covers the 2026 to 2028 syllabus.
Was enthalten ist
Die erste Notiz
Computer systems / Hardware and software
A computer system has two parts. Hardware is the physical equipment: the processor, the memory, the drives, the screen and the keyboard. Software is the set of programs that tells the hardware what to do. Neither is useful alone, because the hardware does nothing without a program, and a program can only run on hardware that is capable of running it.
The central processing unit
The central processing unit (CPU) carries out the instructions in a program. For each instruction it fetches the instruction from memory, decodes what it means, and then executes it, which may mean doing a calculation, moving a value from one place to another, or deciding which instruction to run next. A modern CPU does this billions of times a second.
The processor is the chip that contains the CPU. On a desktop or laptop it sits on the motherboard, the main circuit board. The motherboard connects every other component, so the CPU, memory, storage drives and expansion cards all communicate through it.
Other internal components
Several other components sit inside the computer or are plugged into it:
- the graphics card, which produces the signal sent to the screen and carries out the work of drawing images;
- the sound card, which turns digital sound data into an audio signal for speakers and converts incoming sound to digital data;
- the network interface card (NIC), which gives the computer a way to connect to a network, either by a cable or by wireless signals;
- internal and external storage drives, which keep data when the power is off;
- a camera, if one is built in, which is an input device that records images.
Input and output devices, and storage devices, are covered in their own notes. What matters here is that each of these is a physical part, so each is hardware.
Memory
A computer has two kinds of internal memory, and the difference between them is important.
| RAM | ROM | |
|---|---|---|
| Full name | random access memory | read-only memory |
| Contents | the programs and data in use at the moment | the instructions the computer needs to start up |
| Can it be changed? | yes, continually as programs run | not in normal use, although the firmware in modern computers can be updated |
| Does it keep its contents without power? | no, it is volatile | yes, it is non-volatile |
RAM is where the CPU keeps the programs and data it is working on. The more RAM a computer has, the more programs it can keep open at once without having to move data out to backing storage, which is much slower to read and write. When the computer is switched off, everything in RAM is lost, so any work that has not been saved to backing storage is gone.
ROM holds the firmware that the computer uses when it is first switched on. That firmware tells the processor how to check its hardware and load the operating system from storage. Modern computers often keep it in flash memory, so that the firmware can be updated, although it is still non-volatile. Because ROM keeps its contents without power, the computer can start even though RAM is empty.
Internal memory and backing storage are not the same thing. Internal memory is fast, is used only for the work in progress, and is limited in size. Backing storage, such as a hard drive or a solid-state drive, keeps data permanently between sessions, holds far more, and is much slower to access.
Software
Software falls into two groups.
Application software provides the services a user needs to do a task. Examples include word processing, spreadsheet and database management systems, control and measurement software, apps on a phone, and programs for video, graphics and audio editing or computer aided design (CAD). A user chooses and runs application software for the job in hand.
System software provides the services the computer itself needs in order to run. It includes:
- compilers, which translate a program written in a high-level language into machine code the processor can run;
- linkers, which join separately compiled parts of a program into one program;
- device drivers, which let the operating system use a particular piece of hardware;
- utilities, which maintain the computer, for example by checking or backing up storage;
- operating systems, which manage the hardware and the other software. These are covered in their own note.
The user seldom sees system software at work, but every application depends on it.
Analogue and digital data
Analogue data varies continuously, such as the sound of a voice, the temperature of a room or the position of a moving part. Digital data is stored as discrete values, written in binary. A computer can only process digital data, so there are two conversions to know.
An analogue-to-digital converter takes a signal from a microphone or a sensor and measures it at regular intervals, storing each measurement as a number. This is needed so that the processor can work on the data. A digital-to-analogue converter does the reverse: it turns the numbers sent by the computer into a continuous signal, so that a device such as a speaker or a motor can use it.
Both conversions are needed when a computer controls a physical device from sensor readings. The sensor's signal is converted to digital so the processor can decide what to do, and the processor's decision is converted back to an analogue signal to drive the device.
Und 33 weitere: Öffne sie über die Liste oben.
Bewertungen
Noch keine schriftlichen Rezensionen. Füge diese Notizen zu deinen hinzu und du kannst die erste Rezension schreiben.