انتقل إلى المحتوى
cookie

Edexcel IGCSE Maths B

IGCSE · EdexcelMaths B31 ملاحظة في 10 مجلدات، 132 KB

31 ملاحظات للمذاكرة، أعدّها cookie، في 10 أقسام تتبع موضوعات المنهج.

Notes for Pearson Edexcel International GCSE in Mathematics (Specification B, 4MB1), in folders for the ten content areas in the specification's order: Number; Sets; Algebra; Functions; Matrices; Geometry; Mensuration; Vectors and transformation geometry; Trigonometry; Statistics and probability. Each note covers one topic, with methods and worked examples.

ما المحتوى؟

الملاحظة الأولى

Number / Operations, factors and indices

Order of operations

A calculation with several operations is worked in a fixed order: brackets first, then powers and roots, then multiplication and division from left to right, and then addition and subtraction from left to right. Brackets change the order, so 2+3×4=142 + 3 \times 4 = 14 but (2+3)×4=20(2 + 3) \times 4 = 20.

Division and multiplication have equal priority, so 24÷6×224 \div 6 \times 2 is worked from the left: 4×2=84 \times 2 = 8. Writing 24÷(6×2)24 \div (6 \times 2) gives 22 instead, which is why a fraction bar works as a bracket around its top and bottom.

For 6+4×(9−5)2÷86 + 4 \times (9 - 5)^2 \div 8, the bracket is worked first, (9−5)2=16(9 - 5)^2 = 16, then the multiplication and division from the left, 4×16÷8=84 \times 16 \div 8 = 8, and finally the addition, 6+8=146 + 8 = 14.

Negative numbers

Two signs next to each other combine into one. Adding a negative is subtracting, so 5+(−3)=25 + (-3) = 2, and subtracting a negative is adding, so 5−(−3)=85 - (-3) = 8. Multiplying or dividing two negatives gives a positive, so (−4)×(−6)=24(-4) \times (-6) = 24, while a single negative factor gives a negative answer.

Factors and multiples

A factor of a whole number divides it exactly, and a multiple is a whole number's product with another whole number. A prime number has exactly two factors, 1 and itself. The number 1 is not prime.

Every whole number greater than 1 can be written as a product of primes in one way only, apart from the order of the factors. This is its prime factorisation, and it is found by dividing by the smallest prime that goes in, repeatedly. For 360:

360=2×180=2×2×90=2×2×2×45=23×32×5 \begin{aligned} 360 &= 2 \times 180 \\ &= 2 \times 2 \times 90 \\ &= 2 \times 2 \times 2 \times 45 \\ &= 2^3 \times 3^2 \times 5 \end{aligned}
Highest common factor and lowest common multiple

The highest common factor (HCF) of two numbers is the largest number that divides both. The lowest common multiple (LCM) is the smallest number that both divide into. Writing each number as a product of primes gives both at once: the HCF takes each prime to the smaller of its two powers, and the LCM takes each prime to the larger power.

For 84 and 90:

84=22×3×790=2×32×5 \begin{aligned} 84 &= 2^2 \times 3 \times 7 \\ 90 &= 2 \times 3^2 \times 5 \end{aligned}

The HCF takes 212^1 and 313^1, so it is 66. The LCM takes 222^2, 323^2, 55 and 77, so it is 4×9×5×7=1 2604 \times 9 \times 5 \times 7 = 1\,260. As a check, the product of the two numbers equals the product of the HCF and LCM: 84×90=7 560=6×1 26084 \times 90 = 7\,560 = 6 \times 1\,260.

Index notation and the index laws

A power ana^n is aa multiplied by itself nn times, and aa is the base and nn the index (or power). Three laws cover all the combinations of powers with the same base:

am×an=am+nam÷an=am−n(am)n=amn a^m \times a^n = a^{m+n} \qquad a^m \div a^n = a^{m-n} \qquad (a^m)^n = a^{mn}

These follow from counting factors. For example 35×323^5 \times 3^2 is seven threes multiplied together, which is 373^7.

For 35×3−2÷343^5 \times 3^{-2} \div 3^4, the powers of 3 combine to 35−2−4=3−1=133^{5 - 2 - 4} = 3^{-1} = \dfrac{1}{3}.

Zero and negative indices

Any non-zero number to the power zero is 1. This follows from the division law, since an÷an=a0a^n \div a^n = a^0 and that quotient is 1. A negative index means the reciprocal of the positive power:

a−n=1an a^{-n} = \frac{1}{a^n}

So 2−3=182^{-3} = \dfrac{1}{8}, and (−2)−3=−18(-2)^{-3} = -\dfrac{1}{8} because the sign comes from the base and not from the reciprocal.

Fractional indices

A fractional index means a root and a power together. The denominator gives the root and the numerator gives the power:

a1n=anamn=(an)m a^{\frac{1}{n}} = \sqrt[n]{a} \qquad a^{\frac{m}{n}} = \left(\sqrt[n]{a}\right)^m

Taking the root first is usually easier, because it keeps the numbers small. For 272327^{\frac{2}{3}}, the cube root of 27 is 3, and 32=93^2 = 9. For 8438^{\frac{4}{3}}, the cube root of 8 is 2, and 24=162^4 = 16.

A negative fractional index inverts the base as well. For (49)−12\left(\dfrac{4}{9}\right)^{-\frac{1}{2}}, the square root of 49\dfrac{4}{9} is 23\dfrac{2}{3}, and the reciprocal of that is 32\dfrac{3}{2}.

Worked example

Write 25×4382\dfrac{2^5 \times 4^3}{8^2} as a single power of 2.

Each base is written as a power of 2: 43=264^3 = 2^6 and 82=268^2 = 2^6. The expression becomes

25×2626=21126=25 \begin{aligned} \frac{2^5 \times 2^6}{2^6} &= \frac{2^{11}}{2^6} \\ &= 2^{5} \end{aligned}

which is 32. Working with the powers first and multiplying out at the end gives the same answer, and avoids large numbers in the middle of the working.

و30 أخرى: افتح أياً منها من القائمة أعلاه.

التقييمات

لا توجد مراجعات مكتوبة بعد. أضف هذه الملاحظات إلى مجموعتك، ويمكنك أن تكون أول من يكتب مراجعة.