انتقل إلى المحتوى
cookie

Edexcel IGCSE Chemistry

IGCSE · EdexcelChemistry32 ملاحظة في 4 مجلدات، 147 KB

32 ملاحظات للمذاكرة، أعدّها cookie، في 4 أقسام تتبع موضوعات المنهج.

Notes for Edexcel IGCSE Chemistry (4CH1), following the specification first examined in June 2019, in folders for its four topics in the specification's order. Each note has the definitions, equations and worked calculations for its sub-topic, and points tested only on Paper 2 are marked where they sit. Delete any folder your course leaves out once the notes are yours.

ما المحتوى؟

الملاحظة الأولى

Principles of chemistry / States of matter and solutions

The three states of matter

Every substance you meet in the lab is a solid, a liquid or a gas, and the state depends on how its particles are arranged, how they move and how much energy they carry. The particles are atoms, molecules or ions, and they are always in motion. The more energy they have, the more freely they move.

In a solid the particles are packed closely together in a regular pattern. They cannot move from place to place, so the solid keeps its shape and volume. They do vibrate about fixed positions, and the more energy they have, the harder they vibrate.

In a liquid the particles are still close together, but with no regular arrangement. They can slide past one another, so a liquid has a fixed volume but takes the shape of its container.

In a gas the particles are far apart, with no regular arrangement, and they move quickly in straight lines until they hit something. A gas fills whatever container it is in, and it can be compressed because there is so much empty space between the particles.

Table: the three states compared

PropertySolidLiquidGas
Arrangementregular, close togetherirregular, close togetherirregular, far apart
Movementvibrate about fixed positionsslide past one anothermove quickly and randomly
Shapefixedtakes the shape of the containerfills the container
Volumefixedfixedfills the container
Compressiblenovery littleyes

Changes of state

A change of state happens when energy is transferred to or from the particles, which changes how they are arranged and how they move. The changes have names:

  • melting: solid to liquid
  • freezing: liquid to solid
  • evaporation and boiling: liquid to gas
  • condensation: gas to liquid
  • sublimation: solid to gas without passing through the liquid state, as with solid iodine

Melting needs energy because the particles must gain enough energy to break out of their fixed positions and move more freely. Freezing gives energy out, because the particles lose energy and settle into fixed positions. The temperature stays constant while a substance is melting or freezing, since the energy goes into changing the arrangement of the particles rather than raising their movement.

Evaporation can happen at any temperature, unlike boiling, which happens throughout the liquid at a fixed temperature. In evaporation only the particles at the surface with enough energy escape, so the liquid cools as the most energetic particles leave. Boiling needs the whole liquid to reach the boiling point, where the vapour pressure equals the pressure of the atmosphere, so bubbles of gas form inside the liquid.

Diffusion and dilution of coloured solutions

Particles in a gas or a liquid spread out on their own, because they move randomly. This is called diffusion. Bromine vapour is a convenient gas to show diffusion: a tube of bromine vapour above a tube of air spreads out through the air over time, even though nothing stirs it. Gas particles also spread faster when they are lighter, so the lighter gas moves further in a diffusion tube.

The same random movement explains dilution. A coloured solution such as potassium manganate(VII) or copper(II) sulfate spreads through a larger volume of water when it is added, and the colour fades as its particles spread through the water. The total number of coloured particles does not change, so the colour fades without the particles disappearing.

Solutions, solvents and solutes

A solution forms when a solid, liquid or gas (the solute) dissolves in a liquid (the solvent). Water is the most common solvent, and salt in water is the usual example: the salt is the solute and the mixture is the solution. The particles of solute are spread evenly through the solvent, so the solution is the same throughout and does not separate on standing.

A solution is saturated when the solvent cannot dissolve any more solute at that temperature. If more solute is added, it stays undissolved at the bottom of the container. Each substance has its own solubility, and it usually rises with temperature.

Solubility

Solubility is the mass of solute that dissolves in 100 g of solvent at a given temperature, measured in grams per 100 g of water. Paper 2 only: The solubility of a salt is always stated with its temperature, because the same salt can have a very different solubility at a higher temperature.

Paper 2 only: A solubility curve plots solubility against temperature, with temperature on the horizontal axis and grams per 100 g of water on the vertical axis. Most solids have curves that rise steeply, so a hot saturated solution holds much more solute than a cold one. To find the solubility at a particular temperature, read up from that temperature to the curve and then across to the vertical axis. For potassium nitrate, for example, a curve that reads about 60 g per 100 g of water at 40 °C means that 60 g of the salt dissolves in 100 g of water at 40 °C to make a saturated solution.

A worked example with the same method: a saturated solution at 30 °C contains 40 g of solute in 100 g of water. The mass of the solution is 140 g. If 70 g of water is then evaporated and the solution is cooled back to 30 °C, the water left is 30 g, which holds 40 × 30 / 100 = 12 g of solute. So 40 − 12 = 28 g of solute crystallises out.

Paper 2 only: A practical to measure solubility is to add a known mass of solid to a known mass of water in a boiling tube held at a fixed temperature in a water bath, stir until no more dissolves, and then filter off the undissolved solid and weigh it. The mass of solid that dissolved, scaled to 100 g of water, gives the solubility at that temperature. Stirring for long enough and keeping the temperature constant are the two things that make the result reliable.

Filtration of undissolved solids

Insoluble solids can be separated from a solution by filtration. The solution passes through filter paper, which holds the solid back. This is the first step in preparing many salts, covered in the notes on salts.

و31 أخرى: افتح أياً منها من القائمة أعلاه.

التقييمات

لا توجد مراجعات مكتوبة بعد. أضف هذه الملاحظات إلى مجموعتك، ويمكنك أن تكون أول من يكتب مراجعة.