Eduqas GCSE Maths
20 ملاحظات للمذاكرة، أعدّها cookie، في 6 أقسام تتبع موضوعات المنهج.
Revision notes for Eduqas GCSE Mathematics (C300), in the order of the specification's topic areas: number, algebra, ratio and proportion, geometry and measures, probability and statistics. Higher-tier content is marked where it appears.
ما المحتوى؟
الملاحظة الأولى
Number / Integers, decimals and powers
Structure and calculation
Place value and ordering
Each digit in a number is worth ten times the digit to its right. In 4706.35 the 7 stands for 700 and the 5 for five hundredths. Multiplying by 10 moves every digit one place to the left, and dividing by 100 moves every digit two places to the right.
To order decimals, write them with the same number of decimal places and compare digit by digit from the left. Negative numbers order along the number line, so the further left a number is, the smaller it is: −8<−3<0.
The four operations with negatives
Subtracting a negative number is the same as adding the positive: −7−(−3)=−7+3=−4. In a product or quotient, two like signs give a positive answer and two unlike signs give a negative one:
Decimals in multiplication and division
To multiply decimals, ignore the decimal points, multiply the whole numbers, then put back as many decimal places as the two original numbers had between them.
Worked example
Find 3.4×0.25.
The whole-number product is 34×25=850. The two factors have one and two decimal places between them, so the answer has three: 0.850=0.85.
To divide by a decimal, multiply both numbers by the same power of ten until the divisor is a whole number. The answer does not change, because both parts are scaled equally.
Worked example
Find 7.56÷0.12.
Multiply both numbers by 100: 756÷12=63.
Prime factors, HCF and LCM
A prime number has exactly two factors, 1 and itself. Writing a number as a product of primes is its prime factorisation, and it is unique apart from the order of the factors.
The highest common factor takes the lowest power of each prime that appears in both numbers. The lowest common multiple takes the highest power of each prime that appears in either. So HCF(360,84)=22×3=12 and LCM(360,84)=23×32×5×7=2520.
Powers and roots
A power an means a multiplied by itself n times. The index laws follow from this:
Any non-zero number to the power 0 is 1, so 50=1. A negative index means a reciprocal: 2−3=231=81.
A square root of a is a number that multiplies by itself to give a, and a cube root is a number that gives a when cubed. The cube root of a negative number is negative, so 3−27=−3.
Higher tier only: a fractional index combines a root and a power. The denominator gives the root and the numerator gives the power, so 1643=(416)3=23=8 and 27−31=3271=31.
Higher tier only: estimate a root by finding the two whole numbers it lies between, then refining. Since 72=49 and 82=64, 60 lies between 7 and 8. Since 7.72=59.29 and 7.82=60.84, it is about 7.75, and to one decimal place it is 7.7.
Standard form
A number in standard form is written as A×10n, where 1≤A<10 and n is an integer. The power of ten tells you how many places the decimal point has moved.
Large numbers have a positive power and small numbers a negative one. To multiply two numbers in standard form, multiply the A parts and add the powers, then adjust if the new A is not between 1 and 10. For (3×104)×(2×103)=6×107, no adjustment is needed.
Counting arrangements
Higher tier only: if one choice has m outcomes and a second, independent choice has n outcomes, the two together have m×n outcomes. Four people can stand in a line in 4×3×2×1=24 ways.
و19 أخرى: افتح أياً منها من القائمة أعلاه.
التقييمات
لا توجد مراجعات مكتوبة بعد. أضف هذه الملاحظات إلى مجموعتك، ويمكنك أن تكون أول من يكتب مراجعة.